摘要:Prof. Cheng Yuqi(Y. C. Cheng), a famous geologist, an expert in management of geological science and technology and one of the pioneers of China's modern geoscience, passed away at the age of 90 at 16: 06 hours on January 2, 2002 in Beijing as a result of the worsening of his condition after he fell ill and despite medical treatment. Cheng was born in Jiashan County, Zhejiang Province, on October 7, 1912. After he graduated from the Department of Earth Sciences, Tsinghua University in 1933, he served as an investigator of the Geological Survey of the Ministry of Commerce in Beijing. He want to study geology in Liverpool University. Britain,

摘要:A contact zone sandwiched between an arc and an oceanic crust was discovered in the Laohushan area in the present study. It consists of a series of north-dipping imbricated thrust sheets and is exposed on the surface as a narrow arcuate belt, which extends for about 30 km in an E-W direction and measures about 1-3 km wide. Lithologically, it can be divided into four subzones. Subzone 1 consists of meta-andesite and metasandstone; subzone 2, psammitic schists; subzone 3, psammitic and pelitic schists, quartz diorite and hornfelses; and subzone 4, metagabbro, epidote amphibolite and pelitic schists. The metamorphism has the following grading sequence: low greenschist facies in subzone 1 → high greenschist facies in subzone 2 →low amphibolite facies in subzone 3→ epidote amphibolite facies in subzone 4. Petrographic and geochemical evidence shows that rocks in subzones 1, 2 and 3 are arc rocks, whereas those of subzone 4 are oceanic crustal rocks. The metamorphic mineral assemblages and especially miner

摘要:The Ordovician volcanic rocks in the Mayaxueshan area have been pervasively altered or metamorphosed and contain abundant secondary minerals such as albite, chlorite, epidote, prehnite, pumpellyite, actinolite, titanite, quartz, and/or calcite. They were denoted as spilites or spilitic rocks in terms of their petrographic features and mineral assemblages. The metamorphic grades of the volcanic rocks are equivalent to that of the intercalated metaclastic rocks. This indicates that both the spilitic volcanic rocks and metaclastic rocks in the Mayaxueshan area have formed as a result of Caledonian regional metamorphism. We suggest that the previously denoted spilitic rocks or altered volcanic rocks should be re-denoted as metabasalts or metabasaltic rocks. The metamorphic grade of the volcanic rocks increases with their age: prehnite-pumpellyite facies for the upper part of the Middle Ordovician volcanic rocks, prehnite-pumpeilyite to lower greenschist facies for the lower part of the Middle Ordovician vol

摘要:The basement of the central Qilian fold belt exposed along the Minhe-Ledu highway consists of psammitic schists, metabasitic rocks, and crystalline limestone. Migmatitic rocks occur sporadically among psammitic schist and metabasitic rocks. The mineral assemblage of psammitic schist is muscovite + biotite + feldspar + quartz ± tourmaline ± titanite ± sillimanite and that of metabasitic rocks is amphibole + plagioclase + biotite ± apatite ± magnetite ± pyroxene ± garnet ± quartz. The migmatitic rock consists of leucosome and restite of various volume proportions; the former consists of muscovite + alkaline feldspar + quartz ± garnet ± plagioclase while the latter is either fragments of psammitic schist or those of metabasitic rock. The crystalline limestone consists of calcite that has been partly replaced by olivine. The olivine was subsequently altered to serpentine. Weak deformations as indicated by cleavages and fractures were imposed prominently on the psammitic schists, occasionally on me

摘要:After the integration of petrographic study, geothermobarometry and Gibbs method, the synthetic P-T paths for the rocks from different geological profiles in the North Qilian, China, have been derived. The composite P-T paths from different methods indicate that all the high-pressure rocks in the Qilian area recorded P-T paths with clockwise loops starting at the blueschist facies, later reaching peak metamorphism at the blueschist facies, eclogite fades or epidote-amphibolite facies and ending up with the greenschist facies. The incremental Ar-Ar dating shows that the plateau ages for the high-pressure rocks range from 410 to 443 Ma. The plateau ages could be used as a minimum age constraint for the subduction that resulted in the formation of these high-pressure rocks in the Qilian area. It is proposed that the late-stage decompressional and cooling P-T paths with ends at the greenschist facies for these high-pressure rocks probably reflect the uplift process which could occur after shifting the arc-t

摘要:Coesite was discovered as inclusions in zircon separates from pelitic gneiss associated with a large eclogite body in the North Qaidam ultrahigh-pressure (UHP) terrane. Some graphite inclusions were also found. This finding suggested the occurrence of in-situ UHP metamorphism and that the terrane was most likely recrystallized at pressures below the diamond stability field. It supported other previous indirect UHP evidence, such as polycrystalline quartz inclusions in eclogitic garnet, quartz lamellae in omphacite and P-T estimates for both eclogite and garnet peridotite. The U-Pb and Sm-Nd ages of the North Qaidam eclogite indicated that subduction of continental crust occurred in the Early Palaeozoic, which probably recorded a collision between the Sino-Korean and Yangtze plates.

摘要:Up to now it is known that almost all ultrahigh-pressure (UHP) metamorphism of non-impact origin occurred in continent-continent collisional orogenic belt, as has been evidenced by many outcrops in the eastern hemisphere. UHP metamorphic rocks are represented by coesite- and diamond-bearing eclogites and eclogite facies metamorphic rocks formed at 650-800℃ and 2.6-3.5 GPa, and most of the protoliths of UHP rocks are volcanic-sedimentary sequences of continental crust. From these it may be deduced that deep subduction of continental crust may have occurred. However, UHP rocks are exposed on the surface or occur near the surface now, which implies that they have been exhumed from great depths. The mechanism of deep subduction of continental crust and subsequent exhumation has been a hot topic of the research on continental dynamics, but there are divergent views. The focus of the dispute is how deep continental crust is subducted so that UHP rocks can be formed and what mechanism causes it to be subducte

摘要:It is generally considered that granitic plutons are forcefully emplaced in a compressional setting and permissively emplaced in an extensional setting. This paper, however, shows that syn-kinematic (extensional) elliptic granitic plutons in the Yagan-Onch Hayrhan metamorphic core complex (MCC) have relatively strong forceful emplacement, which are indicated by (1) concentric distribution of the rock units, (2) a strain pattern with strong strains on the margins and low strains at the centre of a pluton, and particularly (3) syn-emplacement shortening of the host rocks within the aureole. The strain analysis for the host rocks shows that the host-rock ductile shortening, i.e. forceful emplacement, provides about 16-24% of the emplacement space for the present plutons. All these suggest that forceful emplacement occurs not only in a compressional tectonic setting, but also in an extensional setting. This study further demonstrates the significance of the multiple emplacement of granitic plutons and provi

摘要:The Tepearasi Formation of the autochthonous Geyikdagi Group in the Central Tauride Belt, SE of Beysehir, is Dogger in age and consists dominantly of massive limestones and greyish dolomites occurring within the middle to upper sections. The total thickness of the dolomitic levels ranges from 100-300 m and laterally extends 500-700 m. Three types of dolomite were distinguished through petrographic analyses: homogeneous, mottled (saddle-crystalline) and joint-filling dolomite, which were interpreted to have formed in two different stages, early diagenetic and late diagenetic. The homogeneous dolomite of the early diagenetic stage is light-coloured and monotonous-textured and shows the form of a dolosparite mosaic. The mottled dolomite formed in the late diagenetic stage is light- to dark-coloured and coarsely granular idiomorphic. The other type of late diagenetic dolomite, described as the joint-filling type, presents a crystal growth pattern from the joint walls towards the centre of the joint space. I

摘要:The Lajishan orogenic belt is one of the E-W-trending Caledonian erogenic belts within the Qinling-Qilian orogenic system. It was formed upon the Jiningian basement by intensive taphrogenesis. Its major characteristics comprise the prominent faulting along the north and south boundaries, the highly complicated petrological and petro-geochemical features of the volcanic rock series, and the development of a new type of ophiolite suite. In terms of tectonic analysis and the sequential analysis of tectonic settings of magmatic rocks, it is suggested that the Lajishan orogenic belt has undergone a complete "opening-closing" cycle, which can be further divided into 3 second-order "opening-closing" cycles. The composite characteristics of the "opening-closing" movement show that Laji Mountain is a typical fault orogenic belt. The fault orogenic belt is one of the most important types of intracontinental orogens. It is of critical theoretical and practical significance to summarize the characteristics and the

摘要:Zircon SHRIMP ages of the Aolaoshan granite on the south margin of the Qilian Mts. range from 445±15.3 to 496±7.6 Ma (averaging 473 Ma), belonging to the Early Ordovician. Geochemically, the granite is similar to I-type granite and, tectonically, was formed in an island-arc environment based on relevant diagrams for structural discriminations. Considering also the regional geology, the authors suggest that the granite is part of an ultrahigh-pressure belt on the south margin of the Qilian Mts. and that its formation bears a close relationship to this belt.

摘要:This paper presents a biotite-calcic hornblende geothermometer which was empirically calibrated based on the gamet-biotite geothermometer and the gamet-plagioclase-hornblende-quartz geobarometer, in the ranges of 560-800℃ (T) and 0.26-1.4 GPa (P) using the data of metadolerite, amphibolite, metagabbro, and metapelite collected from the literature. Biotite was treated as symmetric Fe-Mg-AlVI-Ti quaternary solid solution, and calcic hornblende was simplified as symmetric Fe-Mg binary solid solution. The resulting thermometer may rebuild the input garnet-biotite temperatures well within an uncertainty of ±50℃. Errors of ±0.2 GPa for input pressure, along with analytical errors of ?% for the relevant mineral compositions, may lead to a random error of ±16℃ for this thermometer, so that the thermometer is almost independent of pressure estimates. The thermometer may clearly discriminate different rocks of lower amphibolite, upper amphibolite and granulite facies on a high confidence level. It is assume

摘要:Lithology and Protoliths of HP-UHP Eclogite Facies Metamorphic Rocks and Relevant Rocks of the Changpu-Bixiling Area, Dabie Mountains CHENG Yuqi~1, ZHANG Yuxun~2, GAO Tianshan~3 and JIAN Ping~1(1. Institute of Geology, Chinese Academy of Geological Sciences, Beijing 100037; 2. China Geological Survey, Beijing 100029; 3. Geological Survey of Anhui Province, Hefei 230001) Two NNW-trending HP belts are found in the Changpu-Bixiling area, Yuexi County, Anhui Province. The western belt from Tuqiaochong to the Changpu Hydropower Station consists mainly of banded jadeite quartzite and marble with minor quartz-beating dark eclogite and light-coloured eclogite, and the

摘要:Semivariogram is applied to fracture data obtained from detailed scanline surveys of nine field sites in western New York, USA in order to investigate the spatial patterns of natural fractures. The length of the scanline is up to 36 m. How both fracture spacing and fracture length vary with distance is determined through semivariogram calculations. In this study, the authors developed a FORTRAN program to resample the fracture data from the scanline survey. By calculating experimental semivariogram, the authors found five different types of spatial patterns that can be described by linear, spherical, reversed spherical, polynomial I (for a<0) and polynomial II (for a>0) models, of which the last three are newly proposed in this study. The well-structured semivariograms of fracture spacing and length indicate that both the location of the fractures and the length distribution within their structure domains are not random. The results of this study also suggest that semivariograms can provide useful infor