Abstract:

Abstract:

Abstract:Dawazisaurus brevis (gen. et sp. nov.) is a newly discovered Triassic marine reptile, represented by a complete skeleton from Member II of the Guanling Formation of Luoping, Yunnan Province, China. This paper aims to (1) present a thorough description of the species, (2) make a detailed comparison to demonstrate if the species can be referred to any known sauropterygian taxa, and (3) conduct phylogenetic analyses to establish the internal relationships of the species with other sauropterygians. In addition, the discovery of Dawazisaurus provides a chance not only to test the phylogenetic patterns of the Sauropterygia obtained by previous studies but also to evaluate the previous hypotheses on the origin of the sauropterygian groups at different levels. D. brevis is an eosauropterygian, characterized by a unique combination of derived features such as a pair of large nasals joining in the formation of the internarial septum, a short trunk with 16 dorsal vertebrae; the zygapophyses of the trunk vertebrae very small or weakly developed; the posterior margin of the skull roof deeply V-shaped, and an ossified distal carpal 5. Phylogenetic analysis indicates that D. brevis appears to be more closely related to the Nothosauroidea than the Pistosauroidea within the Eosauropterygia.

Abstract:Various combinations of diamond, moissanite, zircon, quartz, corundum, rutile, titanite, almandine garnet, kyanite, and andalusite have been recovered from the Dangqiong peridotites. More than 80 grains of diamond have been recovered, most of which are pale yellow to reddish-orange to colorless. The grains are all 100-200 μm in size and mostly anhedral, but with a range of morphologies including elongated, octahedral and subhedral varieties. Their identification was confirmed by a characteristic shift in the Raman spectra between 1325 cm?1 and 1333 cm?1, mostly at 1331.51 cm?1 or 1326.96 cm?1. Integration of the mineralogical, petrological and geochemical data for the Dongqiong peridotites suggests a multi-stage formation for this body and similar ophiolites in the Yarlung-Zangbo suture zone. Chromian spinel grains and perhaps small bodies of chromitite crystallized at various depths in the upper mantle, and encapsulated the UHP, highly reduced and crustal minerals. Some oceanic crustal slabs containing the chromian spinel and their inclusion were later trapped in suprasubduction zones (SSZ), where they were modified by island arc tholeiitic and boninitic magmas, thus changing the chromian spinel compositions and depositing chromitite ores in melt channels.

Abstract:Two well-developed mesoscopic folds, D2 and D3, which postdate the middle amphibolite metamorphism, were recognized in the western hinterland zone of Pakistan. NW–SE trending D2 folds developed during NE–SW horizontal bulk shortening followed by NE–SW trending D3 folds, which developed during SE–NW shortening. Micro- to mesoscopically the NW–SE trending S2 crenulation cleavage, boudins and mineral stretching lineations are overprinted by D3. The newly established NW–SE trending micro- to mesoscopic structures in Munda termed D2, which postdated F1/F2, is synchronously developed with F3 structures in the western hinterland zone of Pakistan. We interpret that D2 and D3 folds are counterclockwise rotated in the tectonic event that has evolved the Hazara Kashmir Syntaxis after the main phase Indian plate and Kohistan Island Arc collision. Chlorite replacement by biotite in the main matrix crenulation cleavages indicates prograde metamorphism related with D2. The inclusion of muscovite and biotite in garnet porphyroblasts and the presence of staurolite in these rocks indicate that the Barrovian metamorphic conditions predate D2 and D3. We interpret that garnet, staurolite and calcite porphyroblasts grew before D2 because the well developed S2 crenulation cleavage wraps around these porphyroblasts.

Abstract:The geology and tectonics in the eastern margin of Tibetan Plateau are complex. The main tectonic framework is composed of blocks and faults. Using discontinuous global positioning system survey data for 2008–2014, the velocity field for the Eurasia reference framework was obtained. Based on the velocity field, the present-day velocities of the blocks and boundary faults were estimated. The results reveal that the movement rates of the Chuan-Qing, South China, Chuan-Dian and Indo-China blocks are (17.02±0.60) mm/a, (8.77±1.51) mm/a, (13.85±1.31) mm/a and (6.84 ± 0.74) mm/a, respectively, and their movement directions are 99.5°, 120.3°, 142.9° and 153.3°, respectively. All blocks exhibit clockwise rotation. The displacement rates of the Xianshuihe, Longmenshan, Anninghe, Zemuhe, Xiaojiang and Red River faults are (7.30±1.25–8.30±1.26) mm/a, (10.07±0.97–11.79±0.89) mm/a, (0.96±0.74–2.98±1.73) mm/a, (2.03±0.49–3.20±0.73) mm/a, (3.45±0.40–6.02±0.50) mm/a and (6.23±0.56) mm/a, respectively. The Xianshuihe, Anninghe, Zemuhe and Xiaojiang faults show left-lateral strike-slip movement, while the Longmenshan and Red River faults show right-lateral strike-slip. These characteristics of the blocks and faults are related to?the particular tectonic?location and dynamic mechanism.

Abstract:We present in this paper some new evidence for the change during the Quaternary in kinematics of faults cutting the eastern margin of the Tibetan Plateau. It shows that significant shortening deformation occurred during the Early Pleistocene, evidenced by eastward thrusting of Mesozoic carbonates on the Pliocene lacustrine deposits along the Minjiang upstream fault zone and by development of the transpressional ridges of basement rocks along the Anninghe river valley. The Middle Pleistocene seems to be a relaxant stage with local development of the intra-mountain basins particularly prominent along the Minjiang Upstream and along the southern segment of the Anninghe River Valley. This relaxation may have been duo to a local collapse of the thickened crust attained during the late Neogene to early Pleistocene across this marginal zone. Fault kinematics has been changed since the late Pleistocene, and was predominated by reverse sinistral strike-slip along the Minshan Uplift, reverse dextral strike-slip on the Longmenshan fault zone and pure sinistral strike-slip on the Anninghe fault. This change in fault kinematics during the Quaternary allows a better understanding of the mechanism by which the marginal ranges of the plateau has been built through episodic activities.

Abstract:The Late Quaternary slip rate along the Maqu segment of the eastern Kunlun Fault was estimated using a combination of high-resolution remote sensing imagery interpretation, field observations and differential Global Positioning System (GPS) measurements of offset river terraces, and 14C dating of snail shells collected from offset risers. The results show that the left-slip rate along the segment is 3–5 mm/a, and that the vertical slip rate is 0.3–0.5 mm/a. Both the horizontal and vertical slips on the segment remain consistent over a distance of ~100 km. It means that no slip gradient as previously suggested occurred along the Maqu segment, and which thus might behave as an independent seismogenic fault. Judging from multiple relationships among young terrace offsets, we infer that co-seismic surface rupture produced by a characteristic earthquake with a magnitude of Ms7.0–7.5 on the Maqu fault could generate a horizontal slip of 4.5–5 m and a vertical slip of 0.45–0.5 m, with a corresponding ratio (Dh/Dv) of about 9. Two surface rupture events must have occurred over the past 3300 years, the latest one possibly between 1485 cal BP and 1730 cal BP.

Abstract:On April 20th, 2013, an earthquake of magnitude MW 6.6 occurred at Lushan of Sichuan on the southern segment of the Longmenshan fault zone, with no typical coseismic surface rupture. This work plotted an isoseismal map of the earthquake after repositioning over 400 post–earthquake macro–damage survey points from peak ground acceleration (PGA) data recorded by the Sichuan Digital Strong Earthquake Network. This map indicates that the Lushan earthquake has a damage intensity of IX on the Liedu scale, and that the meizoseismal area displays an oblate ellipsoid shape, with its longitudinal axis in the NE direction. No obvious directivity was detected. Furthermore, the repositioning results of 3323 early aftershocks, seismic reflection profiles and focal mechanism solutions suggests that the major seismogenic structure of the earthquake was the Dayi Fault, which partly defines the eastern Mengshan Mountain. This earthquake resulted from the thrusting of the Dayi Fault, and caused shortening of the southern segment of the Longmenshan in the NW–SE direction. Coseismal rupture was also produced in the deep of the Xinkaidian Fault. Based on the above seismogenic model and the presentation of coseismic surface deformation, it is speculated that there is a risk of more major earthquakes occurring in this region.

Abstract:The Ms 7.0 Lushan earthquake triggered a huge number of landslides. Landslide susceptibility mapping is of great importance. Weight of Evidence (WoE) and Logistic Regression (LR) methods have been widely used for LSM (Landslide Susceptibility Mapping). However, limitations still exist. WoE is capable of assessing the influence of different classes of each factor, but neglects the correlation between factors. LR is able to analyze the relationship among the factors while it is not capable of evaluating the influence of different classes. This paper proposes a combined method of LR and WoE for LSM, taking advantage of their individual merits and overcoming their limitations. An inventory of 1289 landslides was used: 70% were random-selected for training and the remaining for validation. 11 landslide condition factors were employed in the model and the result was validated using Receiver Operating Characteristic (ROC) curve. The results showed that the LR-WoE model had a better accuracy than the LR model, producing an area below the curve with values of 0.802 success and 0.791 predictive, higher than that of the LR model (0.715 success and 0.722 predictive). It is therefore concluded that the combined method of WoE and LR can provide a promising level of accuracy for earthquake-induced landslide susceptibility mapping.

Abstract:The Xianshuihe fault zone is a seismo-genetic fault zone of left-lateral slip in Southwest China. Since 1725, a total of 59 Ms ≥ 5.0 earthquakes have occurred along this fault zone, including 18 Ms 6.0–6.9 and eight Ms ≥ 7.0 earthquakes. The seismic risk of the Xianshuihe fault zone is a large and realistic threat to the western Sichuan economic corridor. Based on previous studies, we carried out field geological survey and remote sensing interpretation in the fault zone. In addition, geophysical surveys, trenching and age-dating were conducted in the key parts to better understand the geometry, spatial distribution and activity of the fault zone. We infer to divide the fault zone into two parts: the northwest part and the southeast part, with total eight segments. Their Late Quaternary slip rates vary in a range of 11.5 mm/a – (3±1) mm/a. The seismic activities of the Xianshuihe fault zone are frequent and strong, periodical, and reoccurred. Combining the spatial and temporal distribution of the historical earthquakes, the seismic hazard of the Xianshuihe fault zone has been predicted by using the relationship between magnitude and frequency of earthquakes caused by different fault segments. The prediction results show that the segment between Daofu and Qianning has a possibility of Ms ≥ 7.0 earthquakes, while the segment between Shimian and Luding is likely to have earthquakes of about Ms 7.0. It is suggested to establish a GPS or InSAR-based real-time monitoring network of surface displacement to cover the Xianshuihe fault zone, and an early warning system of earthquakes and post seismic geohazards to cover the major residential areas.

Abstract:Quantitative analysis of the kinematics of the active faults distributed around the Qinghai-Tibetan Plateau is critical to understand current tectonic processes of the plateau. Chronological analysis, based on the comparison among regional climate and geomorphology, digital photogrammetry, offset landforms, and the tectonics were adopted in this study on the Xianshuihe fault in the eastern Tibetan plateau. Two or more offset-age data were obtained for each segment of the Xianshuihe and the Yunongxi faults. The offset landforms, including river terrace, alluvial fan and glacial moraine, provide constraints for the late Quaternary slip rate of the Xianshuihe fault. The left-lateral strike slip rate of the Xianshuihe fault decreases from 17 mm/a on the northwest segment to 9.3 mm/a on the southeast segment. Regarding the Xianshuihe fault zone and its adjacent blocks as a regional tectonic system, vector analysis was used to quantitatively analyze the longitudinal kinematical transformation and transversal slip partitioning on the fault zone in terms of the kinematical parameters of the main faults within the zone. The results show that there is a distributed vertical uplift at a rate of 6.1 mm/yr caused by shortening across the Gongga Mountains region. Based on these results, we established a model of the slip partitioning for the southeastern segment of the Xianshuihe fault zone.

Abstract:The coseismic surface uplift of the Longmen Shan (LMS) created an instantaneous topographic load over the western margin of the Sichuan Basin, where surface subsidence, decreasing eastward, has been measured using several methods, such as GPS, SAR and levelling. Using an elastic flexural model, we aim to interpret the coseismic surface uplift and subsidence, and constrain the effective lithospheric elastic thickness (Te) of the Sichuan Basin. Using different effective elastic thickness values for the Sichuan Basin, a series of subsidence curves were computed by the elastic flexure model equation for a broken elastic plate. The curves, produced by models using an effective elastic thickness of 30–40 km, provided the best fit to the general pattern of observed coseismic subsidence of the Sichuan Basin. However, the calculated subsidence (~40–70 cm) at the front of the LMS is evidently lower than the observed values (~100 cm), suggesting that the effective elastic thickness therein should be lower. These results indicate that the lithospheric strength may decrease westward from the Sichuan Basin to the LMS.

Abstract:The present-day stress state of the Yingxiu-Beichuan fault after the Wenchuan earthquake was re-estimated using measured in-situ stress data obtained after the Wenchuan earthquake. The results reveal that the gradient coefficients of principal stresses versus depth decrease from south to north along the Yingxiu-Beichuan fault, revealing that the stress level decreases from south to north. The consistency between the present-day stress levels and surface ruptures generated during the earthquake indicates that the accumulated tectonic stress beneath the Yingxiu-Beichuan fault before the Wenchuan earthquake was relieved in form of surface ruptures. This resulted in the stress remaining high in the southern section of the Yingxiu-Beichuan fault but relatively low in the northern section. Abnormal high pore pressure conditions and an extremely low frictional coefficient play important role in the interpretation of the stress field adjustment and seismic events observed after the Wenchuan earthquake along this fault, according to the estimation results using the Coulomb frictional-failure theory incorporating frictional coefficients ranging from 0.4 to 1.0. To accurately estimate the seismological hazard of the Yingxiu-Beichuan fault by analyzing fault instability using the Coulomb frictional-failure theory, much attention should be focused on the pore pressure conditions and the evolution state of the frictional coefficient under the present-day stress state.

Abstract:Several argillaceous platforms lie along the Yellow River (YR) of the eastern Guide Basin, northeastern Tibetan Plateau, and their compositions, formation processes, and geomorphic evolution remain debated. Using field survey data, sample testing, and high-resolution remote sensing images, the evolution of the Erlian mudflow fans are analyzed. The data show significant differences between fans on either side of the YR. On the right bank, fans are dilute debris flows consisting of sand and gravel. On the left bank, fans are viscosity mudflows consisting of red clay. The composition and formation processes of the left bank platforms indicate a rainfall-induced pluvial landscape. Fan evolution can be divided into two stages: early-stage fans pre-date 16 kaB.P., and formed during the last deglaciation; late-stage fans post-date 8 kaB.P.. Both stages were induced by climate change. The data indicate that during the Last Glacial Maximum, the northeastern Tibetan Plateau experienced a cold and humid climate characterized by high rainfall. From 16–8 ka, the YR cut through the Erlian early mudflow fan, resulting in extensive erosion. Since 8 ka, the river channel has migrated south by at least 1.25 km, and late stage mudflow fan formation has occurred.

Abstract:The hazard assessment of potential earthquake-induced landslides is an important aspect of the study of earthquake-induced landslides. In this study, we assessed the hazard of potential earthquake-induced landslides in Huaxian County with a new hazard assessment method. This method is based on probabilistic seismic hazard analysis and the Newmark cumulative displacement assessment model. The model considers a comprehensive suite of information, including the seismic activities and engineering geological conditions in the study area, and simulates the uncertainty of the intensity parameters of the engineering geological rock groups using the Monte Carlo method. Unlike previous assessment studies on ground motions with a given exceedance probability level, the hazard of earthquake-induced landslides obtained by the method presented in this study allows for the possibility of earthquake-induced landslides in different parts of the study area in the future. The assessment of the hazard of earthquake-induced landslides in this study showed good agreement with the historical distribution of earthquake-induced landslides. This indicates that the assessment properly reflects the macroscopic rules for the development of earthquake-induced landslides in the study area, and can provide a reference framework for the management of the risk of earthquake-induced landslides and land planning.

Abstract:This work carried out systematic geological field investigation, petrography observation, zircon geochronology and whole rock geochemistry on Late Paleozoic intrusions in the Xingxingxia region near the Xinjiang-Gansu provincial boundary, western China, aiming to constrain the Late Paleozoic tectonic framework of the Xingxingxia region and the final closure time of South Tianshan Ocean in the East Tianshan. The Xingxingxia area is located in the east part of the Tianshan orogen, and adjacent to the north of the Tarim Basin. The Late Paleozoic magma activities in the Xingxingxia region can be mainly divided into three stages. The first stage includes intrusive magma activities under a collision setting between Late Ordovician to the Late Devonian. The second stage is intrusive magma activities under a subduction setting during (304±3)–(278±3) Ma, and the third stage involves intrusive magma activities under a collision and post-collision setting during (268±5)–(259.9±2.6) Ma. The final suture zone of South Tianshan Ocean should be between the Central Tianshan Block and South Tianshan accretionary complex. Based on previous work, both the first stage magma activities (i.e., intrusive magmatic activities between the Late Ordovician to Late Devonian) and the Hongliuhe ophiolitic complex indicate a close event between Central Tianshan Block and South Tianshan Accretionary Complex. The 304±3 Ma dioritic metamorphic gneiss of the XingXingxia complex and the 278±3 Ma diorite are all island arc calc-alkaline rocks, the 289±3 Ma gabbro is island arc tholeiitic gabbro formed by magma from metasomatic enrichment mantle. All these results indicate that the second stage of magmatic activities is under a subduction setting. The third stage magma activities i.e. the granitic magma activities of (268±5)–(259.9±2.6) Ma occurred at a transitional setting from compressional to post-collision extensional tectonic setting. Thus, around (268±5)–(260±3) Ma, the final closure of the South Tianshan Ocean occurred and the Tianshan orogen shifted into the intra-continental evolution stage. During and after the closure process, a wide range of metamorphism and large dextral strike-slip faults developed.

Abstract:Metapelite is one of the predominant rock types in the high-pressure–ultrahigh-pressure (HP–UHP) metamorphic belt of western Tianshan, NW China; however, the spatial and temporal variations of this belt during metamorphism are poorly understood. In this study, we present comparative petrological studies and 40Ar/39Ar geochronology of HP and UHP pelitic schist exposed along the Habutengsu valley. The schist mainly comprises quartz, white mica, garnet, albite and bluish amphibole. In the MnO–Na2O–CaO–K2O–FeO–MgO–Al2O3–SiO2–H2O (MnNCKFMASH) system, P–T pseudosections were constructed using THERMOCALC 333 for two representative pelitic schists. The results demonstrate that there was a break in the peak metamorphic pressures in the Habutengsu area. The northern schist has experienced UHP metamorphism, consistent with the presence of coesite in the same section, while the southern one formed at lower pressures that stabilized the quartz. This result supports the previous finding of a metamorphic gradient through the HP–UHP metamorphic belt of the Chinese western Tianshan by the authors. Additionally, phengite in the northern schist was modelled as having a Si content of 3.55–3.70 (a.p.f.u.) at the peak stage, a value much higher than that of oriented matrix phengite (Si content 3.32–3.38 a.p.f.u.). This indicates that the phengite flakes in the UHP schist were subjected to recrystallization during exhumation, which is consistent with the presence of phengite aggregates surrounding garnet porphyroblast. The 40Ar/39Ar age spectra of white mica (dominantly phengite) from the two schists exhibit similar plateau ages of ca. 315 Ma, which is interpreted as the timing of a tectonometamorphic event that occurred during the exhumation of the HP–UHP metamorphic belt of the Chinese western Tianshan.

Abstract:U–Pb analysis of zircons from igneous rocks in the Elashan Mountain, easternmost segment of the East Kunlun Orogen yielded 252–232 Ma. Geochemically, these rocks are mainly high in SiO2, K2O and K2O+Na2O contents, low in P2O5 and TiO2 contents, depleted in Ba, Sr, P, Ti and enriched in U, Hf, Zr, showing features of I–type granite. The zircon εHf(t) values of the Early Triassic Jiamuge’er rhyolite porphyry (252±3 Ma) are positive (+1.6 to +12.1), suggesting a juvenile crustal source mixing with little old crustal component, and the zircon εHf(t) values of the Middle Triassic Manzhang’gang granodiorite (244±3 Ma) and Dehailong diorite (237±3 Ma) are predominately negative (?8.4 to +1.0), indicating an older crustal source. In comparison, the zircon εHf(t) values of the Late Triassic syenogranites from Suigen’ergang (234±2Ma), Ge’ermugang (233±2 Ma) and Yue’ergen (232±3 Ma) plutons vary from ?3.8 to +5.0, suggesting a crust-mantle mixing source. From Early–Middle Triassic (252–237 Ma) to Late Triassic (234–232 Ma), the geochemical characteristics of these rocks show the change from a subduction–collision setting to a post-collision or within-plate setting. By comparing of these new age data with 77 zircon U–Pb ages of igneous rocks of the eastern part of East Kunlun orogen from published literatures, we conclude that the igneous rocks of Elashan Mountain and these of the eastern part of East Kunlun Orogen belong to one magmatic belt. All these data indicate that the Triassic magmatic events of the eastern part of East Kunlun Orogen can be divided into three stages: 252–238 Ma, 238–226 Ma and 226–212 Ma. Statistically, the average εHf(t) values of the three-stage igneous rocks show a tendency, from the old to young, from ?0.75±0.25 to lower ?2.65±0.52 and then to ?1.22±0.25, respectively, which reveal the change of their sources. These characteristics can be explained as a crust-mantle mixing source generated in a subductional stage, mainly crust source in a syn–collisional stage and a crust-mantle mixing source (lower crust with mantle-derived underplating magma) in a post-collisional stage. The identification of these three magmatic events in the Elashan Mountain, including all the eastern part of East Kunlun Orogen, provides new evidence for better understanding of the tectonic evolution of the northward subduction and closure of the Paleo-Tethyan (252–238 Ma), the collision of the Songpan–Ganzi block with the southern margin of Qaidam block (238–226 Ma), and the post–collisional setting (226–212 Ma) during the Early Mesozoic period.

Abstract:The meta-basic volcanic rocks in the Tengtiaohe Zone yield zircon U–Pb ages of 258.8±2.5 Ma and 259.2±1.8 Ma, respectively which agree with the ages of flood basalts of ELIP and are similar to the basaltic rocks and komatiites from the Song Da Zone in northern Vietnam. The results suggest that the age of meta-basic volcanic rocks is Late Permian, rather than the Early Permian or Early Carboniferous ages as previously inferred. Most meta-basic volcanic rocks are strongly enriched in LREEs relative to HREEs and display trace element patterns similar to the ELIP high-Ti basalts, and are enriched in LILEs with negative Sr anomalies. Their initial 87Sr/86Sr ratios range from 0.705974 to 0.706188 and εNd(t) from ?0.82 to ?2.11. Their magmas were derived from an enriched and deep mantle source without significant crustal contamination. These meta-basic volcanic rocks formed in ELIP. Therefore, the Tengtiaohe Zone is not an ophiolite zone and can link to the Song Da Zone in northern Vietnam.

Abstract:The Silurian bituminous sandstones (SBS) in the Tarim Basin, China are important basin-wide reservoirs with an estimated area of approximately 249000 km2. We investigated the ages of authigenic illites in the SBS reservoirs and constrained their formation timing by using the 40Ar/39Ar step wise heating method. The age spectra, 39Ar recoil loss and their controlling factors were investigated systematically. The 40Ar/39Ar ages were compared with the conventional K/Ar ages of identical clay fractions. The clay in the SBS reservoirs is dominated by orderly mixed-layer illite/smectite (I/S) with 5%–30% smectite layers. The I/S minerals morphology comprises primarily honeycomb, short filamentous and curved-lath particles, characteristic of authigenic illites. The unencapsulated 40Ar/39Ar total gas ages (UTGA) of the authigenic illites range from 188.56 ± 6.20 Ma to 491.86 ± 27.68 Ma, which are 7% to 103% older than the corresponding K/Ar ages of 124.87 ± 1.11 Ma to 383.45 ± 2.80 Ma, respectively. The K-Ar ages indicate multistage accumulations with distinct distribution patterns in the Tarim Basin: older (late Caledonian-early Hercynian) around the basin margin, younger (late Hercynian) in the basin centre, and the youngest (middle to late Yanshanian) in the Ha-6 well-block, central area of the North Uplift. The age difference is believed to have been caused by the 39Ar recoil loss during the irradiation process. Compared with the K/Ar ages, the estimated 39Ar recoil losses in this study are in the range from 7% to 51%. The 39Ar recoil loss appears to increase not only with the decreasing particle sizes of the I/S, but also with increasing percentage of smectite layers (IR) of the I/S, and smectite layer content (SLC) of the samples. We conclude that due to significant 39Ar recoil losses, UTGA may not offer any meaningful geological ages of the authigenic illite formation in the SBS and thus can not be used to represent the hydrocarbon charge timing. 39Ar recoil losses during 40Ar/39Ar dating can not be neglected when dating fine authigenic illite, especially when the ordered mixed-layer I/S containing small amount of smectite layers (IR<30%) in the reservoir formations. Compared with the unencapsulated Ar-Ar method, the conventional K-Ar method is less complicated, more accurate and reliable in dating authigenic illites in petroleum reservoirs.

Abstract:The Batang Group in the Zhaokalong area not only hosts an important Fe-Cu polymetallic deposit but also reveal important insights for the Late Triassic tectonism in the northern Sanjiang region. In order to delineate the tectonic setting and evolutionary process of the paleo arc-basin system, geochemical studies on the Batang Group strata have been carried out. The results suggest that andesite in the Zhaokalong area mainly belongs to the tholeiite series and is characterized by obvious fractionation of LREE and HREE, enrichment in LILE and depletion in HFSE, and a distinctly elevated δ34SCDT average of 10.5‰. The sandstone is classified as lithic sandstone, which is also characterized by obvious fractionation of LREE and HREE, as well as weak negative Ce and Eu anomalies. The limestone displays positive Eu anomalies, with δ13CPDB ranging from ?1.3‰ to 4.4‰ and δ18OSMOW ranging from 14.6‰ to 22.5‰. These results indicate that the andesite has a dual signature of both arc andesite and rift volcanic rocks, whereas the sandstone may be formed in an active continental margin, and the limestone could be deposited in a weak oxidizing shallow sea. The sandstone in the Zhaokalong area represents sedimentation in a platform slope facies, corresponding to the main stage of the Jinshajing oceanic basin subduction during the middle period of Late Triassic. The continental arc volcanic activity resulted from subsequent strengthened subduction, forming the andesite in the North Qiangtang back-arc basin. Afterwards, the limestone was formed after the cessation of magmatic activity. The information gleaned from the Batang Group strata helped constrain the evolution of the paleo-Jomda island arc and Jinshajiang oceanic subduction in the Late Triassic.

Abstract:The Bangbu gold deposit is a large orogenic gold deposit in Tibet formed during the Alpine-Himalayan collision. Ore bodies (auriferous quartz veins) are controlled by the E-W-trending Qusong-Cuogu-Zhemulang brittle-ductile shear zone. Quartz veins at the deposit can be divided into three types: pre-metallogenic hook-like quartz veins, metallogenic auriferous quartz veins, and post-metallogenic N-S quartz veins. Four stages of mineralization in the auriferous quartz veins have been identified: (1) Stage S1 quartz+coarse-grained sulfides, (2) Stage S2 gold+fine-grained sulfides, (3) Stage S3 quartz+carbonates, and (4) Stage S4 quartz+ greigite. Fluid inclusions indicate the ore-forming fluid was CO2-N2-CH4 rich with homogenization temperatures of 170–261°C, salinities 4.34–7.45 wt% NaCl equivalent. δ18Ofluid (3.98‰–7.18‰) and low δDV-SMOW (?90‰ to ?44‰) for auriferous quartz veins suggest ore-forming fluids were mainly metamorphic in origin, with some addition of organic matter. Quartz vein pyrite has δ34SV-CDT values of 1.2‰–3.6‰ (an average of 2.2‰), whereas pyrite from phyllite has δ34SV-CDT 5.7‰–9.9‰ (an average of 7.4‰). Quartz vein pyrites yield 206Pb/204Pb ratios of 18.662–18.764, 207Pb/204Pb 15.650–15.683, and 208Pb/204Pb 38.901–39.079. These isotopic data indicate Bangbu ore-forming materials were probably derived from the Langjiexue accretionary wedge. 40Ar/39Ar ages for sericite from auriferous sulfide-quartz veins yield a plateau age of 49.52 ± 0.52 Ma, an isochron age of 50.3 ± 0.31 Ma, suggesting that auriferous veins were formed during the main collisional period of the Tibet-Himalayan orogen (~65–41 Ma).

Abstract:We present n-alkane distributions in the soil samples along a transect from Lhasa on the Tibetan Plateau to Bharatpur in Nepal, which covers a large geographical area and a wide range of climatic conditions. These data allow us to assess the significance of n-alkane distributions in different vegetation types and their relationships to temperature and precipitation. In the tropical rainforest and broadleaved forest zones, n-alkanes exhibit a bimodal distribution pattern with dominant homologues around n-C31 and n-C23. The bimodal distribution of tropical rainforest n-alkanes may be a general pattern because of the presence of many lianas, epiphytic plants, algae and the strong microbial activity and degradation involved in the postdepositional process. In the warm-temperate mixed forest and needle-leaved forest zones, the long-chain alkanes have a pattern of n-C31 > n-C33 > n-C27. In the alpine shrub and grassland zone, although the most abundant homologue is n-C31, relatively high n-C23 concentrations have also been observed in some samples. The statistical results show a good correlation between n-alkane proxies and climatic factors. The average chain length (ACL) values are positively correlated with precipitation and temperature across the transect. The carbon preference index (CPI) values show a negative correlation with temperature and precipitation along a Lhasa–Bharatpur transect. Although there is a positive relationship between ACL and temperature, it is difficult to separate the two climatic variables (temperature and precipitation) because they are well coupled in the monsoon region.

Abstract:

Abstract:

Abstract:

Abstract:

Abstract:

Abstract:

Abstract:

Abstract:

Abstract:

Abstract:

Abstract:

Abstract:

Abstract:

Abstract: