Abstract:A brief introduction to the morphology, flight, size, habits, diet, feathers and systematic paleontology of fossil enantiornithine birds known from the Mesozoic of China is provided. Enantiornithine birds were the dominant land birds of the Mesozoic (245–65 Myr). Although they show great morphological differences from modern birds, their diversification in many respects mimics that of the modern land bird radiation and the reasons for their extinction at the end-Cretaceous remain a mystery.

Abstract:A new genus and species of fossil elaterid namely Clavelater ningchengensis gen. et sp. nov. assigned to the subfamily Protagrypninae based on one specimen from the Middle Jurassic Jiulongshan Formation near Daohugou Village, Ningcheng County, Inner Mongolia, northeastern China is described and illustrated. This specimen displays a pair of large antennae that easily differs from those of most Mesozoic elaterids. There are around 36 species within 20 genera referred to elateroids described from the Early Jurassic to Miocene of China, with another three species within three genera reviewed, but the taxonomic assignment of at least seven species within three genera is doubted. The systematic position of fossil elateriform beetles reported from China is reviewed and the evolution of Mesozoic elateroids briefly discussed.

Abstract:The skull of Anshunsaurus huangnihensis Cheng, 2007, especially the skull roof, is described in detail in this paper. Compared to other genera and species of Askeptosauroidea, Anshunsaurus huangnihensis has some important transitional characters from Askeptosaurus italicus to Anshunsaurus huangguoshuensis: the rostral length related to the skull length between Askeptosaurus italicus and Anshunsaurus huangguoshuensis; the postfrontal existing but distinctly reduced; the posterolateral process relatedly short and overlapping the parietal. The phylogenetic analysis weakly supports the evolutional progress from Anshunsaurus huangnihensis to Anshunsaurus huangguoshuensis. The skeletal ratios indicated that the node among the Askeptosauridae ingroup. The evolutional direction of Askeptosauridae should be from Askeptosaurus italicus to Anshunsaurus huangguoshuensis. The skeletal ratios indicated that the evolutional progress is Askeptosaurus italicus – Anshunsaurus huangnihensis – Anshunsaurus huangguoshuensis. In biogeography provinces, the Askeptosauroidea taxa from south China have a close relationship with those from western Tethys; however, Xinpusaurus from the Late Triassic is more related to those from the eastern Pacific.

Abstract:The planktic foraminifera of the Chuangde Formation (Upper Cretaceous Oceanic Red Beds, CORBs) as exposed at Tianbadong section, Kangmar, southern Tibet has been firstly studied for a detailed for a detailed biostratigraphy elaboration. A rich and well-preserved planktic foraminifera were recovered from the Chuangde Formation of the Tianbadong section and the Globotruncanita elevata, Globotruncana ventricosa, Radotruncana calcarata, Globotruncanella havanensis, Globotruncana aegyptiaca, Gansserina gansseri and Abathomphalus mayaroensis zones have been recognized. The planktic foraminiferal assemblage points to an early Campanian to Maastrichitian age for the CORBs of the eastern North Tethyan Himalayan sub-belt, which also provides a better understanding of the shifting progress of the Indian Plate to the north and the evolution of the Neotethyan ocean. The lithostratigraphy of the Chuangde Formation of the Tianbadong section comprises two lithological sequences observed in ascending succession: a lower unit (the Shale Member) mainly composed of purple (cherry-red, violet-red) shales with interbedded siltstones and siliceous rocks; and an upper unit (the Limestone Member) of variegated limestones. The strata of the Chuangde Formation in the Tianbadong section are similar to CORBs in other parts of the northern Tethyan Himalaya area of Asia (Gyangze, Sa’gya, Sangdanlin, northern Zanskar, etc.). The fossil contents of the Chuangde Formation in the sections (CORBs) studied provide a means of correlation with the zonation schemes for those of the northern Tethyan Himalayan sub-belt and the Upper Cretaceous of the southern Tethyan Himalayan sub-belt. Paleogeographic reconstruction for the Late Cretaceous indicates that the Upper Cretaceous Chuangde Formation (CORBs) and correlatable strata in northern Zanskar were representative of slope to basinal deposits, which were situated in the northern Tethyan Belt. Correlatable Cretaceous strata in Spiti and Gamba situated in the southern Tethyan Belt in contrast were deposited in shelf environments along the Tethyan Himalayan passive margin. CORBs are most likely formed by the oxidation of Fe(II)-enriched, anoxic deep ocean water near the chemocline that separated the oxic oceanic surface from the anoxic.

Abstract:A synthesis is given in this paper on late Mesozoic deformation pattern in the zones around the Ordos Basin based on lithostratigraphic and structural analyses. A relative chronology of the late Mesozoic tectonic stress evolution was established from the field analyses of fault kinematics and constrained by stratigraphic contact relationships. The results show alternation of tectonic compressional and extensional regimes. The Ordos Basin and its surroundings were in weak N-S to NNE-SSW extension during the Early to Middle Jurassic, which reactivated E-W-trending basement fractures. The tectonic regime changed to a multi-directional compressional one during the Late Jurassic, which resulted in crustal shortening deformation along the marginal zones of the Ordos Basin. Then it changed to an extensional one during the Early Cretaceous, which rifted the western, northwestern and southeastern margins of the Ordos Basin. A NW-SE compression occurred during the Late Cretaceous and caused the termination of sedimentation and uplift of the Ordos Basin. This phased evolution of the late Mesozoic tectonic stress regimes and associated deformation pattern around the Ordos Basin best records the changes in regional geodynamic settings in East Asia, from the Early to Middle Jurassic post-orogenic extension following the Triassic collision between the North and South China Blocks, to the Late Jurassic multi-directional compressions produced by synchronous convergence of the three plates (the Siberian Plate to the north, Paleo-Pacific Plate to the east and Lhasa Block to the west) towards the East Asian continent. Early Cretaceous extension might be the response to collapse and lithospheric thinning of the North China Craton.

Abstract:In January 2010, the Suining Ms5.0 earthquake occurred in central Sichuan Basin, with the epicenter in Moxi-Longnvsi structural belt and a focal depth of 10 km. Based on structural interpretations of seismic profiles in this area, we recognized a regional detachment fault located at a depth of 9–10 km in the Presinian basement of the Suining area, transferring its slipping from NW to SE orientation. This detachment fault slipped from NW to SE, and underwent several shears and bends, which caused the basement to be rolled in and the overlaying strata fold deformation. It formed a fault-bend fold in the Moxi area with an approximate slip of 4 km. Correspondingly, the formation of the Moxi anticline is related to the detachment fault. With the earthquake’s epicenter on the ramp of the detachment fault, there is a new point of view that the Suining earthquake was caused by re-activation of this basement detachment fault. Since the Late Jurassic period, under the influence of regional tectonic stress, the detachment fault transfered its slip from the Longmen Mountains (LMS) thrust belt to the hinterland of the Sichuan Basin, and finally to the piedmont zone of southwest Huayingshan (HYS), which indicates that HYS might be the final front area of the LMS thrust belt.

Abstract:Major elements of 2202 basalts from the East Pacific Rise (EPR) and 888 basalts from near-EPR seamounts are used to investigate their differences in magma crystallization pressures and mantle melting conditions. Crystallization pressure calculation from basalts with 5.0wt%

Abstract:Gamma-ray spectrometer (GRS) is one of the main payloads on the Chang’E-1 (CE-1) lunar probe, mainly aimed to detect the elemental abundances and distributions on the lunar surface. At 03:58 on 28 November 2007, it performed the first observation of the lunar gamma rays. As of 24 October 2008, 2105?h of effective gamma rays spectra had been acquired by CE-1 GRS, which covers the whole surface of the moon. This paper mainly describes the data processing procedures and methods of deriving the elemental abundances by using the CE-1 GRS time series corrected spectra: first, to bin data into pixels for mapping; then, to perform a background deduction of the cumulative spectra and obtain a peak area of the elements; and finally, to use the elemental abundances inversion model to produce the elemental abundances. Based on these processing methods, the global abundance maps of U, K, and Th at a 5°×5° equal-area pixel are acquired by CE-1 GRS data. The paper gives a preliminary analysis of the uncertainties of the elemental abundances

Abstract:In Tunisia, five Bahloul spaced sections, Bargou, Jerisa, Guern Halfaya, Kherij and Gafsa were analyzed for biostratigraphy (foraminifera and radiolarians) and major and trace elements. This high-resolution biostratigraphic and chemostratigraphic integrated analyses for the Late Cenomanian–Early Turonian Bahloul Formation provide new insight into the palaeoceanographic evolution of the southern Tethyan margin. Relative low abundance of related terrigenous Ti/Al and K/Al ratios and enrichment of some productivity proxies such as Ba, Cu, and Ni (organic matter related trace elements) suggests that the Bahloul, deposited during a relatively short period (0.5 Ma), was of relatively elevated primary productivity and minimal detrital input. While higher D* values concurrent with lower Ti/Al ratios are interpreted as caused by enhanced fluvial material contribution, due to more humid climate during the OAE-2. Enhanced humidity triggered probably fluvial influxes, resulted in a sluggish water circulation and consequent anoxic/euxinic conditions favoring the preservation of organic matter at the bottom. Enrichments in redox-sensitive trace metals U, V, and Mo in the Bahloul Formation deposits and redox indices, such as V/(V+Ni), U/Th, V/Cr, and Ni/Co, indicate that oxygen-restricted conditions prevailed during the Late Cenomanian to earliest Turonian times and correlate well with relative abundances of some foraminiferal and radiolarian paleo-environmental relevant indicators. High Baxs values and Uauth may indicate anoxic conditions at least at the water–sediment interface during the Bahloul Formation deposition and provide information about low to moderate sulfate-reduction reactions.

Abstract:On the basis of petrogeochemical data, the volcanic lavas of the Baimianxia Formation can be classified into two units: high TiO2 and low TiO2. The TiO2 concentration of the former is generally higher than 1%, which occurs in the lower part with high-grade metamorphism, but the latter is less than 1% and crops out in the upper part with low-grade metamorphism. The high-TiO2 unit is dominated by tholeiitic lavas showing high rare earth element (REE) contents (ΣREE?=?83.4–180.8?μg/g), high light/heavy REE (LREE/HREE) ratios (LREE/HREE=2.17–5.85) and weak negative Eu anomaly (Eu=0.79–1.01). Its trace element patterns display weak Nb-Ta anomalies with respect to Th, K, La, Ce, showing within-plate basalt affinities. In contrast, the low-TiO2 unit is characterized by low REE contents, low LREE/HREE ratios, and pronounced Nb-Ta anomalies, indicating typical arc or continental arc signature. Chondrite-normalized REE patterns of basalts and andesites from the Sanwan Formation are flat or LREE depletion, which is very similar to normal mid-oceanic basalt. Therefore, we suggest that these lavas should be formed in a back-arc basin setting. Sr-Nd isotopic data of the basalt in the lower part suggest that the rocks would have been formed in ~1144?Ma. Based on the geochemical and isotopic features of the basalts, we suggest that these rocks in the low part of the Baimianxia Formation should originate from an asthenospheric oceanic-island basalt-like mantle source, which may be produced by partial melting of garnet lherzolite, and significantly underwent fractional crystallization and crustal or lithospheric mantle contamination en route to the surface. However, laser ablation inductively coupled plasma mass spectrometry zircon U-Pb dating of the basalt sample from the upper part of the Baimianxia Formation gives a 437 Ma, indicating a Early Paleozoic age. The geochemical analysis in this paper suggests that they may originate from an arc or continental arc in response to aqueous fluids or melt expelled from a subducting slab, and the partial melting occurred in the garnet stability field. The samples of basalts and andesites in the Sanwan Formation show they are derived from depleted mantle source similar to normal mid-oceanic basalt. Finally, we can conclude that the lavas in the lower part of the Baimianxia Formation represent the geological records of rift-related volcanism in the middle Proterozoic, which is commonly considered to be the precursor of continental breakup and followed by oceanic basin forming from Neoproterozoic to early Paleozoic. Whereas, the lavas in upper part of the Baimianxia Formation and Sanwan Formations may have been generated by the oceanic and continental conversion that occurred in the early Paleozoic.

Abstract:The existence of the Cretaceous-Tertiary (K/T) boundary in the non-marine succession is expected at Jiayin in the Heilongjiang River area, China. Zircons from a tuff sample from the Baishantou Member of Wuyun Formation in Jiayin were analyzed by the laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) U-Pb dating and fission-track dating methods. Ages of 64.1±0.7 Ma (U-Pb) and 61.7±1.8 Ma (fission-track dating) were obtained, which allow re-evaluation of a previously reported late Maastrichian age for the tuff layer that was in conflict with the paleontological evidence. These results confirm the Danian age of the section in agreement with the paleontological evidence.

Abstract:Zircon U-Pb ages of 163.8–100.4 Ma and 146.6–134.5?Ma are obtained for the granitoids from the Pearl River mouth basin, and from southern Guangdong Province, respectively. These new dating data accord well with the crystallization ages of Yanshanian granitoids broadly in the Nanling. The active continental margin of South China, as revealed by a combination of zircon U-Pb data, underwent a key granitoid-dominated magmatism in 165–100?Ma. Its evolution varied temporally, and spatially, registering under control of the paleo-Pacific slab subduction. The granitoids that occurred in 165–150?Ma broadly from the South China Sea to the Nanling are preferably related to two settings from volcanic-arc to back-arc extension, respectively. The activities of Cretaceous granitoids migrated from the southeastern Guangdong (148–130?Ma) to the Pearl River Mouth basin (127–112?Ma), corresponding to the model of a retreating subduction. The subduction-related granitoid magmatism in South China continued until 108–97?Ma. A tectonic transformation from slab-subduction to extension should occur at ~100?Ma.

Abstract:The major tectonic zone that passes through the border regions of the Anhui, Zhejiang, and Jiangxi Provinces in southeast China has been commonly referred to as the Wan-Zhe-Gan fault zone. Geologically, this zone consists of several regional fault belts of various ages and orientations. We have categorized the faults into four age groups based on field investigations. The Neoproterozoic faults are northeast striking. They start from the northeast Jiangxi Province and extend northeastward to Fuchuan in Anhui Province, the same location of the northeast Jiangxi-Fuchuan ophiolite belt. The faults probably acted? during the Neoproterozoic as a boundary fault zone of a plate or a block suture with mélange along the faults. The nearly east-west- or east-northeast-striking faults are of Silurian ages (40Ar/39Ar age 429 Ma). This group includes the Qimen-Shexian fault and the Jiangwang-Jiekou ductile shear belt. They represent a major tectonic boundary in the basement because the two sides of the fault have clear dissimilarities. The third group of faults is north-northeast striking, having formed since the early-middle Triassic with 40Ar/39Ar ages of 230–254 Ma. They form a fault belt starting from Yiyang in northern Jiangxi and connect with the Wucheng as well as the Ningguo-Jixi faults. This fault belt is a key fault-magmatic belt controlling the formation of Jurassic-Cretaceous red basins, ore distribution, magmatic activity, and mineralization. When it reactivated during the late Cretaceous, the belt behaved as a series of reverse faults from southeast to northwest and composed the fourth fault group. Therefore, classifying the Wan-Zhe-Gan fault zone into four fault groups will help in the analysis of the tectonic evolution of the eastern segment of the Jiangnan orogen since the Neoproterozoic era.

Abstract:Laser ablation-inductively coupled plasma mass spectrometry (LA-ICP-MS) zircon U-Pb dating and geochemical data for the Permian gabbros and diorites in the Hunchun area are presented to constrain the regional tectonic evolution in the study area. Zircons from gabbro and diorite are euhedral-subhedral in shape and display fine-scale oscillatory zoning as well as high Th/U ratios (0.26–1.22), implying their magmatic origin. The dating results indicate that the gabbro and diorite formed in the Early Permian (282±2 Ma) and in the Late Permian (255±3 Ma), respectively. In addition, the captured zircons with the weighted mean age of 279±4 Ma are also found in the diorite, consistent with the formation age of the gabbro within uncertainty. The gabbros belong chemically to low-K tholeiitic series, and are characterized by low rare earth element (REE) abundances, flat REE pattern, weak positive Eu anomalies (δEu), and depletion in high field strength elements (HFSEs, Nb, Ta, and Ti), similar to the high-aluminum basalts from island arc setting. Initial Hf isotopic ratios of zircons from the gabbro range from +7.63 to +14.6, suggesting that its primary magma could be mainly derived from partial melting of a depleted lithospheric mantle. The diorites belong to middle K calc-alkaline series. Compared with the gabbros, the diorites have higher REE abundance, weak negative Eu anomalies, and more depletion in HFSEs (Nb, Ta, and Ti), similar chemically to the volcanic rocks from an active continental margin setting. Initial Hf isotopic ratios and Hf two-stage model ages of zircons from the diorite range from +11.22 to +14.17 and from 424 to 692 Ma, respectively, suggesting that its primary magma could be mainly derived from partial melting of the Early Paleozoic and/or Neoproterozoic accretted lower crust. Taken together, it is suggested that geochemical variations from the Early Permian gabbros to the Late Permian diorites reveal that the subduction of the Paleo-Asian oceanic plate beneath the Khanka Massif and collision between the arc and continent (Khanka Massif) happened in the late stage of the Late Paleozoic.

Abstract:The Tuolugou cobalt deposit is the first independent large-scale Co- and Au-bearing deposit discovered in northwestern China. It is located in the eastern Kunlun orogenic belt in Qinghai Province, and occurs conformably in low-grade metamorphic volcano-sedimentary rock series with well-developed Na-rich hydrothermal sedimentary rocks and typical hydrothermal sedimentary ore fabrics. Fluid inclusions and isotopic geochemistry studies suggest that cobalt mineralizing fluid is dominated by NaCl-H2O system, accompanied by NaCl-CO2-H2O-N2 system responsible for gold mineralization. Massive, banded and disseminated pyrite ores have similar compositions of He and Ar isotopes from the mineralizing fluid, with 3He/4He range between 0.10 to 0.31Ra (averaging 0.21Ra), and 40Ar/36Ar between 302 and 569 (averaging 373), which reflects that Co mineralizing fluids derived dominantly from meteoric water deeply circulating. δ34S values of pyrite approaches to zero (δ34S ranging from ?4.5‰ to +1.5‰, centering around ?1.8‰ to ?0.2‰), reflecting its deep source. Ore lead is characterized by distinctly high radiogenesis, with 206Pb/204Pb>19.279, 207Pb/204Pb>15.691 and 208Pb/204Pb>39.627, and its values show an increase trend from country rocks, regional Paleozoic volcanic rocks to ores. This may have suggested that high radiogentic ore Pb derived mainly from country rocks by leaching meteoric water-dominated hydrothermal fluid during its circulation at depth. Cobalt occurs mainly in sulfide phase (such as pyrite), but cobalt enrichment, and presence and increasing contents of Co-bearing minerals have a positive correlation with metamorphic degree. The Tuolugou deposit and other typical strata-bound Co-Cu-Au deposits have striking similarities in the geological features and metallogenic pattern of primary cobalt. All of them are syngenetic hydrothermal exhalative sedimentation in origin.

Abstract:Anatase and its allomorphic mineral rutile have the most prominent economic significance among titanium mineral resources and constitute one of the badly needed mineral resources currently in China. The Yantizishan-Moshishan anatase deposit was formerly referred to as an iron deposit. Based on recent investigation and exploration the authors believe that it is actually a large metamorphosed sedimentary anatase-dominated deposit belonging to a new genetic type. Ore bodies occur in stratoid and lenticular forms in Mesoproterozoic (1751 Ma) schist, metasandstone (metasiltstone), and amphibolite. Rich ores have perthitic structure comprising chiefly interbedded quartz perthite (with disseminated anatase and rutile) and anatase perthite. Ore minerals are mainly anatase and subordinately rutile and ilmenite (±hematite), while nonmetallic minerals are chiefly quartz with a certain amount of anthophyllite and biotite (±garnet). The grain sizes of anatase, rutile and ilmenite are 0.01–0.1 mm. Rich ores contain 3.14% to 15.46% TiO2, averaging 6.91%, while the low-grade ores have TiO2 content about 1.2%to 2.97%, averaging 1.76%. The ores have relatively high TFe and V contents. Trace elements in anatase and rutile such as Nb and Cr were analyzed by the electron microprobe. According to their relatively low Nb and Cr contents, source anatase and rutile must have come from meta-mafic rocks. Trace elements of the associated ilmenite show relatively high MnO and low MgO contents, just in contrast to those of ilmenite in V-Ti-magnetite ores of magmatic origin. The protoliths of amphibolite wall rocks should be basalt and picrite-basalt. Pertochemical data suggest that the tectonic setting of these rocks belongs to an island arc or a transitional belt between the island arc and oceanic ridge. Silicon isotope study shows that δ30Si values of different anatase ores, quartzite, and schist in this deposit are 0.1‰ to –0.9‰, similar to those of marine hydrothermal exhalative sedimentary deposits. All of these geological and geochemical characteristics of the ore deposit suggest that the anatase ores and amphibolite are products of submarine basic volcanism. The ores had chemical precipitation features, but were later subjected to regional intermediate (or somewhat lower) grade metamorphism (1158 Ma). Rutile was formed mainly in the process of this metamorphism. The ore belt locally underwent hydrothermal modification during the emplacement of Late Yanshanian granite (118?Ma).

Abstract:The Huangsha-Tieshanlong quartz-vein tungsten polymetallic ore deposit, located in the northern Pangushan-Tieshanlong tungsten ore field in eastern Ganxian-Yudu prospecting areas of the Yushan metallogenic belt, is a well-known tungsten deposit in southern Jiangxi province, China. SHRIMP-determined dating of zircons from the Tieshanlong granite yields ages of 168.1±2.1 Ma (n=11, MSWD=1.3). Rhenium and osmium isotopic dating of molybdenite from the Huangsha quartz-vein tungsten deposit determined by ICP-MS yields a weighted average ages of 153±3 Ma and model ages of 150.2±2.1 Ma – 155.4±2.3 Ma. The age of the Huangsha tungsten deposit is 10 to 15 Ma later than the Tieshanlong granite, which shows that there might have been another early Late Jurassic magmatic activity between 150 and 160 Ma, a process which is closely related with tungsten mineralization in this area. The Tieshanlong granite, the Huangsha tungsten deposit and the Pangushan-Tieshanlong ore field were all formed around 150–170 Ma, belonging to products of a Mesozoic second large-scale mineralization. According to the collected molybdenite Re-Os dating results in southern Jiangxi province, the timescale of the associated molybdenum mineralization is 2–6 Ma in the tungsten deposit and the timescale of independent molybdenum mineralization is 1–4 Ma, implying the complexity of tungsten mineralization. Times of molybdenum mineralization are mainly concentrated in the Yanshanian, which includes three stages of 133~135 Ma, 150–162 Ma, and 166–170 Ma, respectively. The 150–162 Ma-stage is in accordance with ages of large-scale W-Sn mineralization, which is mainly molybdenum mineralization characterized by associated molybdenum mineralization with development of an even greater-intensity independent molybdenum mineralization. Independent molybdenum mineralization occurred before and after large-scale W-Sn mineralization, which indicates that favorable prospecting period for molybdenum may be in Cretaceous and early late Jurassic.

Abstract:A large-scale evaporate series is developed in Paleogene-Neogene strata in the Kuqa basin. The series is composed mainly of evaporate with thin beds of clastic rock (mainly mudstone and siltstone). In grayish white medium- and coarse-grained sandstone in Miocene strata, the formation of copper minerals is in close connection with brine. In joint planes, which are developed in vertical strata, are filled with gypsum. Gypsum and copper-mineralized sandstone contains enormous copper minerals, mainly atacamite. According to the SEM analysis for salt rock, gypsum rock, limestone, grayish green siltstone, grayish white medium-coarse-grained sandstone, some minerals are composed of metallic elements including Au, Ag, Cu, Zn, Pb, Co, Ni and U etc., in which Au occurs in a native form, Cu occurs in a native form or as atacamite in salt rock, gypsum rock and limestone, Ag occurs as silver sulfide in gypsum, and Zn, Pb, Co, Ni, U occur as compounds along with the above metallic ions in evaporate or clastic rock. From SEM images, we can see that metallic elements or their compounds (oxides or sulfides) “take root” as grains in salt or gypsum crystals, which belong to primary chemical sedimentation along with evaporate, while some grains “float” on surface of salt or gypsum. In the former case, mineral grains were formed together with salt (gypsum) crystals; while in the latter case, minerals were enriched from internal metallic ions (Paleogene evaporate samples) or external metallic ions (Neogene gypsum samples) in the late stage of evaporate formation. The metallic ions in Paleogene evaporate samples might originate from weathered or denudated materials in the south Tianshan Mountains. The metallic ions in the Neogene evaporate samples might be from metal-bearing brine, which migrated upward to surface along fractures and leached into evaporate (gypsum). Occurrence of metallic minerals and their compounds (elementary substance) in Paleogene evaporate proves that diversified metallic minerals exist in evaporate. The source of metallic ions in the Neogene evaporate series shows that evaporate could provide materials for late-stage metallic mineralization.

Abstract:In order to recognize the impact of aqueous medium on gas yields and the kinetic behaviors of hydrogen isotope fractionation during organic matter thermal degradation, the gold tube apparatus was used to conduct thermal simulation experiments by mixing the nC18 with the water of different properties and proportions. The yields of natural gas components, the relation among hydrogen isotope composition of each component and the experimental temperatures vs. heating rates have been obtained, and the results indicate that under the higher temperature conditions, the hydrous experiment has obvious impact on gas yields, such as when more water is added, higher amounts of hydrocarbon gas and H2 are yielded, and the existence of water obviously prolongs the temperature interval with the existence of heavy hydrocarbon gas. It also shows that the hydrogen isotope of hydrocarbon gas generated by the hydrous experiment is obviously lighter than that generated by the anhydrous experiment, and with the increasing amount of added water, the δD value of hydrocarbon gas gradually decreases. Compared with gas yields, the variation of δD value is more sensitive to aqueous medium in the thermal simulation experiment. However, compared with the amount of the added water, the aqueous medium property has smaller impact on the gas yields, which still shows the inherit effect on hydrogen isotope composition of aqueous medium. Through the model simulation and the isotope fractionation behavior analysis, it is validated that the hydrogen isotope fractionation process can be well described by the chemical kinetic model. The difference of reaction fraction of normal methane and D-containing methane is large, corresponding to the same activation energy. The content of normal methane is obviously higher in the part with lower activation energy, while the content of D-containing methane is higher in the part with higher activation energy. Therefore, it will result in larger hydrogen isotope fractionation amplitude, and the δD values will be more sensitive to the variation of maturity. Meanwhile, the average activation energy of methane generation from nC18 in the hydrous experiment is higher than that in the anhydrous experiment, and the greater amount of added water, the larger the average activation energy of methane generation reaction. This has laid foundation for its exploratory application in the study of gas reservoir forming history and the gas-source correlation, which indicates the research and application prospects in this orientation.

Abstract:Based on the abundant information from drilling, cores, and logging, the influence of topography, size of rivers and lakes, climate changes and the lake level’s fluctuation on the sandbodies at shallow-water delta front are systematically summarized and the sedimentary dynamic processes are analyzed. The interwell communication among the sandbodies and their planar distribution revealed from the hydrodynamic features of the development wells are integrated during the analysis. The fundamental requirements for the development of the shallow-water delta included flat topography and uniform subsiding rate. The delta plain was connected smoothly with the wide delta front and predelta, without the three-fold structure of topset, foreset, and bottomset as defined in the Gilbert Delta Model. Because of the weak fluvial effect and the lake energy is strong, the small and scattered shallow-water delta is destroyed by the scouring-backwashing, coastal current, and lake wave, resulting in the coastal sheet deposition. As the fluvial effect became stronger and the lake energy became weaker, the shape of the shallow-water deltas transferred from sheets to lumps and then branches.

Abstract:Land subsidence is a severe hazard threatening Tanggu, a flat lowland area, and evidences of land subsidence can be seen throughout the city. A new reasonable GPS network was set up in this area from 2008 to 2010. The monitoring data show that land subsidence was serious and two main subsidence cones were obviously formed in the region. One emerged at Hujiayuan, with the maximum rate reaching 60 mm/a, and the influence region enlarged prominently from 2005 to 2010. The other one occurred at Kaifaqu, which became obvious only after 2005, and it showed a decreasing tendency with time. To analyze the causes of ground settlement, a correlation between groundwater withdrawal and land subsidence was firstly made. The results confirmed that over-exploitation of groundwater was the major cause for the severe settlement in Hujiayuan. Meanwhile, the subsidence of Kaifaqu was also related to groundwater withdrawal before 2005. However, the relationship became unconspicuous after 2005. To find the cause of this abnormity, a three-dimensional finite element numerical model, coupled with groundwater flow and subsidence, was built. The simulation results indicate that the subsidence induced by high-rise buildings is serious, but the affected range is limited and it also shows a decreasing trend with time, corresponding to the subsidence characteristics at Kaifaqu. Therefore, more attention should be paid to this hazard induced by engineering construction besides groundwater withdrawal, as more high-rise buildings are under construction in Tanggu.

Abstract:In this study, a risk-based management model is developed and applied to an industrial zone. The models proposed by the United States Environmental Protection Agency and Han Bing have been improved by adding a residual ratio of volatile organic compounds (VOC) after boiling and deleting the related parameters in half-life. Using this improved model, an integrated process was used to assess human health risk level in the study area. Compared with water quality analysis, the results highlight the importance of applying an integrated approach for decision making on risk levels and water protection. The results of this study demonstrated that: (1) Compared with these permissible level standards in China (GB 3838-2002) and National Primary Drinking Water Regulations of the United States, the residents’ daily life had not been affected by the groundwater in this area (except for relative bad water quality of HB3-4 and HB3-6); (2) The typical detected organic contaminants of all groundwater samples were chloroform, carbon tetrachloride, trichloroethylene and tetrachloroethene, and the pollution sources were mainly industrial sources by preliminary investigations; (3) As for groundwater, the non-carcinogenic risk values of all samples do not exceed the permissible level of 1.0 and the carcinogenic risk values are relatively lower than the permissible level of 1.00E-06 to 1.00E-04; (4) Drinking water pathway of trichloroethylene and tetrachloroethylene mainly contribute to increasing the health risk of residents’ in study areas; (5) In terms of non-carcinogenic risk and carcinogenic risk, the health risk order for drinking water pathway and dermal contact pathway was: drinking water pathway > dermal contact pathway.

Abstract:

Abstract: