Abstract:The middle Permian Cryptospirifer fauna (brachiopod) has hitherto been found in more than 30 localities in the Yangtze Platform, South China. Examination of data from various localities shows that it occurs stratigraphically in three intervals in the range from the upper Kungurian to Wordian. In the Baoshan block in western Yunnan the fauna occurs in the basal part of the Daaozi Formation and is of possibly an early Wordian age. Outside China the Cryptospirifer fauna has been reported from central and northwest Iran and central Turkey, where the fauna may have an age around the Wordian\Capitanian boundary. Rapid global warming since the late Early Permian and possession of other suitable environmental factors such as proper substrate, clastic input and water depth enabled the Gondwana-derived Baoshan Block and related tectono-stratigraphic units in Iran and Turkey to host the Cryptospirifer fauna, a fauna evolved in the Yangtze Platform that is a type area of the Cathaysian province.

Abstract:A new mamenchisaurid dinosaur, Eomamenchisaurus yuanmouensis gen et sp. nov. is erected based on an incomplete skeleton from the Zhanghe Formation, the Middle Jurassic of Yuanmou, Yunnan Province. The new taxon is characterized by absence of pleurocoels in dorsal vertebrae and the dorsal verterbrae with slightly convex anterior articular surfaces, moderately concave posterior articular surfaces; the fourth trochanter is developed posteromedially on the femur; length ratio of the tibia to the femur is approximately 0.64; and the shaft of the ischium is rod-like. Two fused centra of the posterior dorsal vertebrae (the presumed 9th and the 10th dorsal vertebrae) are similar to those in other mamenchisaurid dinosaurs, including Mamenchisaurus hochuanesis, M. youngi and Chuanjiesaurus anaensis. Therefore, fusion of centra of the ninth and the tenth dorsal vertebrae can be recognized as a synapomorphic character of the Mamenchisauridae.

Abstract:Shales of the Ediacaran Doushantuo Formation of South China contain a new disc-shaped macrofossil, Eoandromeda octobrachiata, characterized by eight spiral arms that were probably housed within an outer membrane. Although the presence of eight radiating structures entails a resemblance to cnidarian octocorals as well as to ctenophores, direct homologies with these extant groups are unlikely. Instead we bring attention to the helicospiral morphology of newly reported embryos from the Doushantuo Formation, suggesting that the long-sought adults of the Ediacaran embryonic metazoans have finally been found.

Abstract:Four new fossil genera and species of true bugs from the family Pachymeridiidae, Beipiaocoris multifurcus, Bellicoris mirabilis, Nitoculus regillus, and Viriosinervis stolidus, are described. New specimens were collected from the Middle and Upper Jurassic non-marine sedimentary strata from the Jiulongshan and Yixian Formations of northeast China. The species Karatavocoris asiatica Becker-Migdisova, 1963, which was considered to be a member of the family Coreidae is transferred to the Pachymeridiidae. A new map of all known and newly discovered fossil pachymeridiid localities is given. The diagnosis of the family is modified.

Abstract:There are different opinions about the Permian/Triassic boundary and its correlation in the Daxian-Xuanhan area because of lacking typical lithological symbols and fossil criterions. Especially, it is very hard to determine the Permian/Triassic boundary in the Daxian-Xuanhan buried areas. This brings many difficulties to geological research and oil and gas exploration. Based on field investigation and studies of well cores, newly found fossils, lithological characteristics and well log analyses, the authors discussed the Permian/Triassic boundary in the Daxian-Xuanhan area and brought forward a specific scheme for its determination and regional correlation.

Abstract:The characteristics of Late Cenozoic tectonic uplift of the southern margin of the Qinghai-Tibet Plateau may be inferred from fluvio-lacustrine strata in the Zanda basin, Ngari, Tibet. Magnetostratigraphic study shows that the very thick fluvio-lacustrine strata in the basin are 5.89–0.78 Ma old and that their deposition persisted for 5.11 Ma, i.e. starting at the end of the Miocene and ending at the end of the early Pleistocene, with the Quaternary glacial stage starting in the area no later than 1.58 Ma. Analysis of the sedimentary environment indicates that the Zanda basin on the southern Qinghai-Tibet Plateau began uplift at ~5.89 Ma, later than the northern Qinghai-Tibet Plateau. Presence of gravel beds in the Guge and Qangzê Formations reflects that strong uplift took place at ~5.15 and ~2.71 Ma, with the uplift peaking at ~2.71 Ma.

Abstract:The Baiyun sag is a deep one developing on the slope of the Pearl River Mouth Basin. It occurs as a composite graben horizontally, and is composed of two sub-sags versus one low uplift. Vertically, the sedimentary architecture could be divided into three layers, i.e. the faulted layer on the bottom, the faulted-ductile stretching layer in the middle and the draping layer on the top. The main rifting stage of the sag is supposed to be characterized by ductile extension and thinning of the crust. The special deformation pattern is probably attributed to the fact that the Baiyun sag is located in the transfer zone of the pre-existing weak zone, which made the sag a strongly deformed area, characterized by the greatly thinned lithosphere and active magmatism. The highly rising mantle under the Baiyun sag should be an important mechanism responsible for the ductile deformation, which caused partial melting of the upper mantle. Upwelling to the upper crust and the sedimentary layers, the partial melting materials accommodated extensional strain and caused non-faulted vertical subsidence. Magma was collected under the transfer zone after the first stage of rifting, and transferred laterally in a direction perpendicular to the extension to the ENE and WSW parts of the sag and upwelled along the NW-trending basal faults, where WNW-trending shear faults developed in swarms. The faulting activity and sedimentation history of the Baiyun sag may have been affected by the ocean ridge jump around 24 Ma and the cessation of sea floor spreading around 16 Ma.

Abstract:Bulk separates of porphyroclastic phengite, neoformed phengite and their mixtures from the Tan-Lu HP mylonites overprinted on the Sulu UHP rocks were analyzed with the 40Ar/39Ar step heating method. Two samples of the neoformed phengite from ultramylonite give 40Ar/39Ar plateau ages of 209.9±1.8 Ma and 214.3±1.8 Ma, which are interpreted as representing cooling times of the Tan-Lu sinistral faulting, and provide geochronological evidence for the syn-orogenic faulting of the Tan-Lu fault zone. The results show that the phengite formed during the retrograde eclogite-facies mylonitization was not contaminated with excess argon and can be used for dating the deformation. Argon closure in previous K-bearing minerals with excess argon under a retrograde HP dry condition is considered to be the reason for lack of excess argon incorporation in the neoformed phengite. Five porphyroclastic phengite samples yield 40Ar/39Ar plateau ages ranging from 666±12 Ma to 307.1±3.3 Ma, which are interpreted as being contaminated with excess argon. Two mixture samples with plateau ages of 239.4±2.1 Ma and 239.3±2.0 Ma show upward-convex age spectra caused by the mixture of older porphyroclastic phengite with excess argon incorporation and younger neoformed phengite without excess argon incorporation. It is demonstrated that excess argon introduced from the previous UHP metamorphism is still preserved in the pre-existing phengite after the Tan-Lu eclogite-facies mylonitization. The intense deformation under HT and HP conditions cannot erase excess argon in the previous phengite totally due to restricted fluid activities. These porphyroclastic phengite previously contaminated with excess argon cannot be used for dating the later HP deformation. This indicates that deformation under a HP dry condition does not play an important role in removing previous 40Are in phengite.

Abstract:In this paper, an experimental study was conducted in order to test the feasibility of sintering mullite directly from the high-alumina fly ash, without adding any extra material. The results show that the mullite contents in most sintered samples are over 70%. The samples sintered from the beneficiated fly ash have a higher content of mullite than those from the as-received fly ash under the same synthetic conditions. To obtain an equal amount of mullite, a higher sintering temperature is needed for the beneficiated fly ash than for the as-received fly ash. Considering the physical properties of sintered mullite, the favorable sintering temperature is 1400 °C for the as-received fly ash and 1500 °C for the beneficiated fly ash. A higher sintering temperature and a shorter holding time are profitable to sintering mullite. The orthogonal test confirmed that the dominant factor affecting mullite synthesis is sintering temperature, and that the most profitable matching conditions are 200 MPa-1500 °C-3 h for the as-received fly ash and 200 MPa-1500 °C-4 h for the beneficiated fly ash.

Abstract:The Limahe intrusion is a typical rock hosting Cu-Ni sulfide deposit in the Panxi district. The major element, trace element and Sr-Nd isotopic geochemical data are reported in this study both firstly and systemically. Age-corrected (87Sr/86Sr)t and εNd(t) isotope values, ranging from 0.687062 to 0.709298, from ?0.6 to ?4.13 respectively, are partly overlap the field of the Emeishan basalt and OIB, and they lie between upper crust and OIB generally. The similar patterns between the Limahe intrusion and the picrites of the Emeishan large igneous province imply the genetic relationship to the Emeishan basalts. Their lower Nb/U (<30), higher (La/Nb)PM and (Th/Ta)PM ratio values (>1) indicate contamination of the upper crust material. The correlation between MgO and major oxides reflects the fractional crystallization of olivine, clinopyroxene and minor plagioclase in the deep-seated chamber. Therefore increased SiO2 and lowered FeO by the upper crustal contamination may trigger immiscible sulfide melt, which then flowed along the structural fracture and intruded into gabbro-diorite, resulting in the formation of Cu-Ni sulfide orebody.

Abstract:The Central Tianshan belt in northwestern China is a small Precambrian block located in the southern part of the Central Asia Orogenic Belt (CAOB), which is considered as “the most voluminous block of young continental crust in the world” that comprises numerous small continental blocks separated by Paleozoic magmatic arcs. The Precambrian basement of the central Tianshan Mountains is composed of volcanic rocks and associated volcano-sedimentary rocks that were intruded by granitic plutons. Geochemical analyses demonstrate that the granitic plutons and volcanic rocks were generated in the Andean-type active continental arc environment like today’s Chile, and the zircon U-Pb SHRIMP dating indicates that they were developed at about 956 Ma, possibly corresponding to the subduction of the inferred Mozambique Ocean under the Baltic-African super-continent.

Abstract:Tongbai-Dabie orogenic belt in Central China is a part of the collisional belt between the Yangtze and North China cratons. It represents one of the most extensive ultrahigh-pressure (UHP) and high-pressure (HP) metamorphic rocks in the world. The Pb isotope mapping in this area is a significant method to constrain the crustal structure and tectonic evolution and to identify the tectonic boundaries within the vertical tectonic stack. Based on the Pb isotope compositions of the Dabie complex (DBC), the Tongbai complex (TBC), UHP and HP metamorphic rocks and associated foliated granites, the lower metamorphosed rocks from North Huaiyang (NHY) tectonic belt, and Cretaceous granites in the Tongbai-Dabie orogenic belt, we determined the Pb isotope geochemical map of the Tongbai-Dabie orogenic belt. The Pb isotope map shows that the Pb isotope compositions are similar within each geological body or lithotectonic unit, but the Pb isotope compositions of different lithotectonic units show systematic variations in the Tongbai-Dabie orogenic belt. The NHY tectonic belt contrasts strongly with the Tongbai-Dabie UHP-HP metamorphic belt in Pb isotope compositions. It is suggested that the line along the Xiaotian-Mozitan fault，the north limit of the Tongbai-Dabie UHP and HP metamorphic rocks, represents an important tectonic boundary. Within the Tongbai-Dabie HP-UHP metamorphic belt, to the south of Xiaotian-Mozitan fault, the vertical variations of Pb isotope compositions in different lithotectonic units and the spatial relationship among different major lithotectonic units have been constrained.

Abstract:Located in the eastern part of the East Qinling molybdenum belt, the Donggou deposit is a superlarge porphyry molybdenum deposit discovered in recent years. The authors performed highly precise dating of the mineralized porphyry and ores in the Donggou molybdenum deposit. A SHRIMP U-Pb zircon dating of the Donggou aluminous A-type granite-porphyry gave a rock-forming age of 112±1 Ma, and the ICP-MS Re-Os analyses of molybdenite from the molybdenum deposit yielded Re-Os model ages ranging from 116.5±1.7 to 115.5±1.7 Ma for the deposit. The ages obtained by the two methods are quite close, suggesting that the rocks and ores formed approximately at the same time. The Donggou molybdenum deposit formed at least 20 Ma later than the Jinduicheng, Nannihu, Shangfanggou and Leimengou porphyry molybdenum deposits in the same molybdenum belt, implying that these deposits were formed in different tectonic settings.

Abstract:Based on investigation of the characteristics of solid waste of two different mines, the Fenghuangshan copper mine and the Xinqiao pyrite mine in Tongling, Anhui province in central-east China, the possibility and the differences of acid mine drainage (AMD) of the tailings and the waste rocks are discussed, and the modes of occurrence of heavy metal elements in the mine solid waste are also studied. The Fenghuangshan copper mine hardly produces AMD, whereas the Xinqiao pyrite mine does and there are also differences in the modes of occurrence of heavy metal elements in the tailings. For the former, toxic heavy metals such as Cu, Pb, Zn, Cd, As and Hg exist mostly in the slag mode, as compared to the latter, where the deoxidization mode has a much higher content, indicating that large amounts minerals in the waste rocks have begun to oxidize at the earth surface. AMD is proved to promote the migration and spread of the heavy metals in mining waste rocks and lead to environmental pollution of the surroundings of the mine area.

Abstract:In a thermal simulation experiment of gold tubes of closed-system, calculating with the KINETICS and GOR-ISOTOPE KINETICS software, kinetic parameters of gas generation and methane carbon isotopic fractionation from Triassic–Jurassic hydrocarbon source rocks in the Kuqa depression of Tarim Basin are obtained. The activation energies of methane generated from Jurassic coal, Jurassic mudstone and Triassic mudstone in the Kuqa Depression are 197–268 kJ/mol, 180–260 kJ/mol and 214–289 kJ/mol, respectively, and their frequency factors are 5.265×1013 s?1, 9.761×1011 s?1 and 2.270×1014 s?1. This reflects their differences of hydrocarbon generation behaviors. The kinetic parameters of methane carbon isotopic fractionation are also different in Jurassic coal, Jurassic mudstone and Triassic mudstone, whose average activation energies are 228 kJ/mol, 205 kJ/mol and 231 kJ/mol, respectively. Combined with the geological background, the origin of natural gas in the Yinan-2 gas pool is discussed, and an accumulation model of natural gas is thus established. The Yinan-2 gas is primarily derived from Jurassic coal-bearing source rocks in the Yangxia Sag. Main gas accumulation time is 5–0 Ma and the corresponding Ro is in the range from 1.25%–1.95%. The loss rate of natural gas is 25%–30%.

Abstract:Based on the theory of formation dynamics of oil/gas pools, the Dongying sag can be divided into three dynamic systems regarding the accumulation of oil and gas: the superpressure closed system, the semi-closed system and the normal pressure open system. Based on the analysis of genesis of superpressure in the superpressure closed system and the rule of hydrocarbon expulsion, it is found that hydrocarbon generation is related to superpressure, which is the main driving factor of hydrocarbon migration. Micro fractures formed by superpressure are the main channels for hydrocarbon migration. There are three dynamic patterns for hydrocarbon expulsion: free water drainage, hydrocarbon accumulation and drainage through micro fissures. In the superpressure closed system, the oil-driving-water process and oil/gas accumulation were completed in lithologic traps by way of such two dynamic patterns as episodic evolution of superpressure systems and episodic pressure release of faults. The oil-bearing capacity of lithologic traps is intimately related to reservoir-forming dynamic force. Quantitative evaluation of dynamic conditions for pool formation can effectively predict the oil-bearing capability of traps.

Abstract:The results obtained in this paper indicate that carbazole-type compounds have high thermal stability and also show stability in oxidation and bio-degradation. This kind of compounds still has a high concentration and complete distribution in the analyzed dry asphalt samples, showing that they are particularly useful in studying petroleum migration of paleo-pool. During the basin’s first-stage of oil-gas pool formation in the Silurian in Tazhong and Tabei areas of Tarim Basin (at the end of Silurian period) and the second-stage in the Awati area (in Permian), the petroleum experienced a long-distance migration. During the formation of the Silurian paleo-pools in Tazhong Uplift at the end of Silurian, the petroleum mainly came from the lower and middle Cambrian source rocks in the Manjiaer sag. The petroleum migrated towards the southwest-south entering the Silurian reservoir beds in Tazhong first. Then, it further migrated within Silurian from northwest to southeast along the highs of the Structural Belts to the region of the Silurian pinchout boundary in Tazhong. In Tabei Uplift, during the first-stage of pool formation, the petroleum was also from the lower and middle Cambrian source rocks in the Manjiaer sag. It migrated northwest entering the Silurian reservoir beds in the Tabei Uplift firstly, and then the migration continued in the same direction within the Silurian reservoirs and finally the petroleum was trapped in higher positions. During the second-stage pool formation in the Silurian beds in the areas around Awati sag, the petroleum mainly came from the lower-middle Cambrian source rocks in the Awati sag. The petroleum migrated from the generation center to Silurian reservoirs in all directions around the sag through major paths, and the petroleum was finally trapped in higher locations.

Abstract:Subtle traps or oil pools have become an important exploration play in the Dongying Depression, Bohai Bay Basin, east China. Despite recent successes in exploration, the formation mechanisms of subtle traps are still not well understood. The majority of subtle oil pools in the Dongying Depression are developed in the middle interval of the Es3 Member of the Paleogene Shahejie Formation with the subtle traps being primarily of lenticular basin-floor turbidite sands encompassed in mudstones. Oil in the subtle traps was previously thought to have migrated directly from the surrounding source rocks of the same formation (Es3). Detailed geochemical investigation of 41 oils and 41 rock samples from the depression now indicates that the oils from the subtle traps cannot be correlated well with the surrounding Es3 source rocks, which are characterized by high Pr/Ph (>1), low Gammacerane/C30hopane, representing a freshwater lacustrine setting. In contrast the oils features low Pr/Ph (<1) and relatively high Gammacerane content, showing a genetic affinity with the underlying Es4 source rocks, which also have the same qualities, indicating a brackish lacustrine setting. Oils in the Es3 subtle traps are probably derived from mixed sources with the contribution from the upper Es4 source rocks predominating. Therefore unconventional oil migration and accumulation mechanisms need to be invoked to explain the pooling of oils from the Es4 source rocks, which probably came through a thick low interval of the Es3 source rocks with no apparent structural or stratigraphic pathways. We suggest that the subtle oil migration pathway probably plays an important role here. This finding may have significant implications for future exploration and the remaining resource evaluation in the Dongying Depression.

Abstract:This paper probes the determination of the main gas-generation phase of marine organic mattes using the kinetic method. The main gas-generation phase of marine organic matters was determined by coupling the gas generation yields and rates in geological history computed by the acquired kinetic parameters of typical marine organic matters (reservoir oil, residual bitumen, low-maturity kerogen and residual kerogen) in both China and abroad and maturity by the EasyRo(%) method. Here, the main gas-generation phase was determined as Ro%=1.4%–2.4% for type I kerogen, Ro%=1.5–3.0% for low-maturity type II kerogen, Ro%=1.4–2.8% for residual kerogen, Ro%=1.5–3.2% for residual bitumen and Ro%=1.6–3.2% for reservoir oil cracking. The influences on the main gas-generation phase from the openness of the simulated system and the “dead line” of natural gas generation are also discussed. The results indicate that the openness of simulation system has a definite influence on computing the main gas-generation phase. The main gas-generation phase of type II kerogen is Ro%=1.4–3.1% in an open system, which is earlier than that in a closed system. According to our results, the “dead line” of natural gas generation is determined as Ro=3.5% for type I kerogen, Ro=4.4–4.5% for type II kerogen and Ro=4.6% for marine oil. Preliminary applications are presented taking the southwestern Tarim Basin as an example.

Abstract:Paleocurrent indicator data collected in field work were used to study the early Cenozoic regional paleodrainage patterns in the Hoh Xil basin in northern Tibetan plateau. The paleocurrent directions of the Eocene Fenghuoshan Group obviously show that the flows were northward with a unidirectional dispersal pattern. This probably reflects the uplift of the Qiangtang terrain during the initial basin deposition period and indicates that the Tanggula Moutains occurred as topographic highlands at least in the Eocene. Paleoflows of the Oligocene Yaxicuo Group were dominantly oriented to the north and then flowed eastwards during its late deposition. This regional variability of paleodrainage patterns of the Yaxicuo Group is interpreted to record the dispersal style of sediments from transverse rivers to longitudinal river systems. It is inferred that the Oligocene uplift of the Kunlun Mountains obstructed by northward paleoflows and created longitudinal river systems parallel to the orogenic belts. The temporal and spatial changes of the paleodrainage patterns suggest that the northern boundary of the Tibetan plateau during the early Cenozoic was situated in the Hoh Xil area and its uplift has progressed northwards through time.

Abstract:Landslide hazard and risk assessment on the northern slope of Mt. Changbai, a well-known tourist attraction near the North Korean-Chinese border, are assessed. This study is divided into two parts, namely, landslide hazard zonation and risk assessment. The 1992 Anbalagan and Singh method of landslide hazard zonation (LHZ) was modified and used in this area. In this way, an Associative Analysis Method was used in representative areas to get a measure for controlling factors (slope gradient, relative relief, vegetation, geology, discontinuity development, weak layer thickness and ground water). For the membership degree of factor to slope failure, the middle range of limited values was used to calculate LHZ. Based on an estimation of the potential damage from slope failure, a reasonable risk assessment map was obtained using the relationship of potential damage and probable hazard to aid future planning and prediction and to avert loss of life.