Home > Archive>Volume 94, Issue 2, 2020 >444-455. DOI:10.1111/1755-6724.14300
PDF HTML XML Export Cite reminder
Cyclic Characteristics of the Physical Properties of Key Strata in CBM Systems Controlled by Sequence Stratigraphy―An Example from the Gujiao Block
CSTR:
[cstr]
Author:
Fund Project:

This work was supported by the National Natural Science Foundation of China (No. 41672149 and No. 41672146), the Key Project of the Natural Science Foundation of China (No. 41530314), the Application Research Plan of Key Scientific Research Projects in Colleges and Universities of Henan Province (20B610006) the Scientific Research Foundation of the Shandong Provincial Key Laboratory of Depositional Mineralization & Sedimentary Minerals, the Shandong University of Science and Technology (DMSM2017012) and the National Science and Technology Major Project (2016ZX05044-002).

  • Article
    • | |
  • Metrics
    • |
  • Reference
    • |
  • Related
    • |
  • Cited by
    • | |
  • Comments
    Abstract:

    Multiple coal seams and interbedded rock assemblages formed in vertical progression due to the influence of multiple stages of sea level transgressions. Based on mercury injection experiment, low temperature liquid nitrogen experiment, porosity and permeability experiment and breakthrough pressure experiment, the vertical variation characteristics of coal-bearing strata in Gujiao block are explained in detail. The results of the mercury injection and low temperature liquid nitrogen experiments show that the pore structure characteristics fluctuate with increasing depth in the strata, with fewer micropores followed by transition pores. The BET specific surface area and average pore diameter of the Shanxi Formation are generally larger than those of the Taiyuan Formation. Due to the continuous cyclic sequence stratigraphy changes, the porosity, permeability, breakthrough pressure and breakthrough time of the samples show a certain cyclicity. Within the same sequence, the porosity is larger, and the permeability is smaller near the maximum flooding surface. Although the permeability of the sandstone samples is higher, the porosity is lower, and the breakthrough pressure and breakthrough times are greater. The strata in the study area formed in an oxidized environment that was affected by freshwater, and the pore structure of different lithologies is quite different. After the formation of sandstone, the intergranular pores generally underwent filling with secondary quartz, clay minerals and organic matter, resulting in low porosity and permeability.

    Reference
    Related
    Cited by
Get Citation

WANG Gang, QIN Yong, XIE Yiwei, WANG Ziwei, WANG Boyang, WANG Qi, ZHANG Xiaoyang.2020. Cyclic Characteristics of the Physical Properties of Key Strata in CBM Systems Controlled by Sequence Stratigraphy―An Example from the Gujiao Block[J]. Acta Geologica Sinica(),94(2):444-455

Copy
Share
Article Metrics
  • Abstract:
  • PDF:
  • HTML:
  • Cited by:
History
  • Received:October 15,2018
  • Revised:April 17,2019
  • Online: April 23,2020
Article QR Code
You are the Visitors
Governing Body：China Association for Science and Technology
Organizer：Geological Society of China
Address：No. 26 Baiwanzhuang Street, Xicheng District, Beijing 100037, China
Phone：010-68999024

京公网安备 11000002000088号 | 京ICP备11041704号
® 2025 All Rights Reserved