The Aghajari Formation, called also the Upper Fars, develops throughout the Folded Zagros Zone and its thickness in the type section in southwest of Iran is 2966 meters. To analyze the sedimentary basin of this Formation, lithofacies, architectural elements and petrofacies of the related deposits in a section in southeast of Sarvestan in Fars Province of Iran with a thickness of 2221.45 meters were examined. Microscopically studying thin sections, the petrography and the occurrence of the deposits were determined. In this section, 16 lithofacies, 10 architectural elements and 2 sandstone petrofacies were identified. The lithofacies were divided into two major and minor groups, in which the major lithofacies consist of coarse-grained (Gh, Gp, Gt and Gm), medium-grained (Sh, Sp, St, Sl, Sm, Sr and Ss and fine-grained ones (Fm, Fl and Fsm), and the minor lithofacies were evaporative and mixed silisiclastic-carbonate. The identified architectural elements are CH, SB, GB, LA, DA, CR, CS, LV, LS, CH (FF) and FF. By combining evidences from facies analysis and architectural elements together, the Aghajari Formation was divided into three parts in which the related sedimentation environments, from top to bottom, are gravel, gravel-sand and fine-grained meandering river respectively. There have also been playas and shoreface in the lower part. Based on petrography, the sandstones of this formation were classified into two groups: litharenite and sublitharenite. The origin of these deposits (sandstones) was appointed to the recycled orogeny and the source of quartz is low and medium to high metamorphic rank. Using the field evidences, the paleocurrent direction was achieved indicating the direction of the paleocurrent from northwest to southeast at the time of deposition. It is hoped that these data can be used in the interpretation of the basin and reconstruction of the paleogeography in the local and regional scales.