摘要:

摘要:

摘要:

摘要:Two new coniferous wood taxa, Protocedroxylon zhangii sp. nov. and P. zhalantunense sp. nov., are described from the Middle Jurassic Wanbao Formation in Zhalantun City, Inner Mongolia, NE China. The new discovery represents the first record of petrified wood in the Wanbao Formation, and contributes to further understanding the floral composition, especially that of the forest, of the Wanbao Formation. Anatomically, the two new species are characterized by having a mixed type of radial pitting and Abietineentüpfelung. In extant conifers, Abietineentüpfelung is considered to be characteristic of the wood of Pinaceae. The new discovery further indicates that the first occurrence of Abietineentüpfelung in conifer-like wood should be earlier than the Kimmeridgian. The palaeolatitudinal distribution pattern of Protocedroxylon indicates that the genus is a palaeobiogeographically consistent group, which was probably restricted to wetter and cooler temperate climates. In combination with distinct growth rings, the occurrence of Protocedroxylon suggests that a cool temperate and seasonal climate might have prevailed during the sedimentation period of the Wanbao Formation in eastern Inner Mongolia, NE China. Such a view is also in agreement with the palaeoclimatic conditions indicated by the plant megafossils of the Wanbao Formation.

摘要:A >1500–km–long northeast–southwest trending Neoproterozoic metamorphic belt in the South China Craton (SCC) consists of subduction mélange and extensional basin deposits. This belt is present under an unconformity of Devonian–Carboniferous sediments. Tectonic evolution of the Neoproterozoic rocks is crucial to determining the geology of the SCC and further influences the reconstruction of the Rodinia supercontinent. A subduction mélange unit enclosed ca.1000–850–Ma mafic blocks, which defined a Neoproterozoic ocean that existed within the SCC, is exposed at the bottom of the Jiangnan Orogen (JO) and experienced at least two phases deformation. Combined with new (detrital) zircon U–Pb ages from metasandstones, as well as igneous rocks within the metamorphic belt, we restrict the strongly deformed subduction mélange as younger than the minimum detrital age ca. 835 Ma and older than the ca. 815 Ma intruded granite. Unconformably overlying the subduction mélange and the intruded granite, an intra–continental rift basin developed <800 Ma that involved abundant mantle inputs, such as mafic dikes. This stratum only experienced one main phase deformation. According to our white mica 40Ar/30Ar data and previously documented thermochronology, both the Neoproterozoic mélange and younger strata were exhumed by a 490–400–Ma crustal–scale positive flower structure. This orogenic event probably induced the thick–skinned structures and was accompanied by crustal thickening, metamorphism and magmatism and led to the closure of the pre–existing rift basin. Integrating previously published data and our new results, we agree that the SCC was located on the periphery of the Rodinia supercontinent from the Neoproterozic until the Ordovician. Furthermore, we prefer that the convergence and dispersal of the SCC were primarily controlled by oceanic subduction forces that occurred within or periphery of the SCC.

摘要:The Salmas geothermal field is located in NW Iran. Subduction of Neo-Tethys oceanic crust beneath the Iranian microcontinent caused to propagation of the magmatic-Arc. Fractures and faults in the convergent zone have created path-ways for the circulation of geothermal fluid. Fracture concentration in the Salmas geothermal field has been characterized using of the fractal method and creation of a fracture density map that shows the highest concentration in the central part of the study area. The permeability of fractures has been evaluated by analyzing their orientation in respect to the paleostress axes. Also, the fractal analyzing result indicates the maximum fractal dimension (1.96) is around the thermal spring outlet. Paleostress analyzing revealed that in the central part of the study area, σ1 axes orientation is S90°W/10° and the σ2 dip is near to the vertical in this stress field, where strike slip faults can be propagated. In the SE part near the recharge of the thermal springs, the σ3 plunge increases to 70? and σ1 orientation is N15°E/20°, in this local tectonic regime thrust fault developed. Fractures have an important role in the circulation of fluid and the fractal dimension increases near the thermal springs in the Salmas geothermal field. Regarding the paleostress data fracture with N-S direction such as the F1 fault zone (parallel to the σ1 axes), a suitable pathway for deep circulation of geothermal fluid flow has been created.

摘要:The study of Late Cretaceous magmatic rocks, developed as a result of magmatism and related porphyry mineralization in the northern Lhasa block, is of significance for understanding the associated tectonic setting and mineralization. This paper reports zircon chronology, zircon Hf isotope data, whole-rock Sr–Nd isotope data, and geochemistry data of Balazha porphyry ores in the northern Lhasa block. Geochemical features show that Balazha ore-bearing porphyries in the northern Lhasa block belong to high-Mg# adakitic rocks with a formation age of ~90 Ma; this is consistent with the Late Cretaceous magmatic activity that occurred at around 90 Ma in the region. The age of adakitic rocks is similar to the molybdenite Re–Os model age of the ore-bearing porphyries in the northern Lhasa block, indicating that the diagenesis and mineralization of both occurred during the same magmatism event in the Late Cretaceous. The Hf and Sr–Nd isotope data indicate that these magmatic rocks are the product of crust–mantle mixing. Differing proportions of materials involved in such an event form different types of medium-acid rocks, including ore-bearing porphyries. Based on regional studies, it has been proposed that Late Cretaceous magmatism and porphyry mineralization in the northern Lhasa block occurred during collision between the Lhasa and Qiangtang blocks.

摘要:New zircon U–Pb ages, whole-rock geochemistry and zircon Hf isotopes from the Habo porphyry Western Yunnan, China, were determined to provide constraints on the timing of uplift of the Eastern Tibetan Plateau. The intrusive rocks consist of shoshonitic porphyry (syenite porphyry and monzonite porphyry). Zircon laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) U–Pb dating indicates coeval emplacement ages of ~35 Ma. The porphyries have alkaline affinities, enrichment in large ion lithophile elements (LILEs) and light rare earth elements (LREEs) (e.g., Rb, Th, U, Pb), with depletion of high field strength elements (HFSEs) (e.g., Nb, Ti, Ta) and weak Eu anomalies. They display uniform Lu–Hf isotopic compositions with negative zircon εHf(t) values ranging from -3.9 to -0.6. The chemical characteristics of the syenite porphyries indicated that they most likely originated from the lower crust, with mantle-derived material involved in their generation. Geochemically, the monzonite porphyries are similar to the syenite porphyries; however, the lower MgO contents suggest that they were produced by different degrees of partial melting of the same lower crust source. Combined with the geochemical and isotopic data in this paper, imply that the alkali-rich porphyries of the Habo polymetallic deposit were derived from the partial melting of lower crust, enriched by mantle magma, formed in a conversion stage from stress extrusion (a strike-slip shear process) to local stress relaxation (a strike-slip pull-apart process) at the Ailaoshao tectonic zone.

摘要:The Hongshi copper deposit is located in the middle of the Kalatage ore district in the northern segment of the Dananhu-Tousuquan island-arc belt in East Tianshan, Xinjiang, NW China. This study analyses the fluid inclusions and H, O, and S stable isotopic compositions of the deposit. The fluid-inclusion data indicate that aqueous fluid inclusions were trapped in chalcopyrite-bearing quartz veins in the gangue minerals. The homogenization temperatures range from 108°C to 299°C, and the salinities range from 0.5% to 11.8%, indicating medium to low temperatures and salinities. The trapping pressures range from 34.5 MPa to 56.8 MPa. The δ18OH2O values and δD values of the fluid range from ?6.94‰ to ?5.33‰ and from ?95.31‰ to ?48.20‰, respectively. The H and O isotopic data indicate that the ore-forming fluid derived from a mix of magmatic water and meteoric water and that meteoric water played a significant role. The S isotopic composition of pyrite ranges from 1.9‰ to 5.2‰, with an average value of 3.1‰, and the S isotopic composition of chalcopyrite ranges from ?0.9‰ to 4‰, with an average value of 1.36‰, implying that the S in the ore-forming materials was derived from the mantle. The introduction of meteoric water decreased the temperature, volatile content, and pressure, resulting in immiscibility. These factors may have been the major causes of the mineralization of the Hongshi copper deposit. Based on all the geologic and fluid characteristics, we conclude that the Hongshi copper deposit is an epithermal deposit.

摘要:Spinel exsolution is widespread in titanomagnetite from the Fe-Ti oxide gabbro of the Panzhihua intrusion, Emeishan Large Igneous Province, SW China. However, little research has been conducted into the implications of patterns in the mineralogical characteristics of the spinel for spatial variation in the controls on the exsolution mechanism and, hence, the formation process of the ore deposit. This study selected the Lanjiahuoshan Ore Block in the Panzhihua V-Ti magnetite deposit to explore this issue, systematically studying exsolution textures in the titanomagnetite through petrographic observation and the integrated use of in-situ microanalysis. The results show that the exsolved spinel gradually becomes finer-grained and less abundant from the center to edge and the bottom to top of the ore bodies. Compositionally, there is an inverse correlation between the size of exsolved spinel grains and their Mg# value. In addition, there is compositional zonation in the spinel interiors, with a gradual increase in the Mg content and decrease in Fe content from the core to the rim. The analysis suggests that fractional crystallization of ferrotitanium magma with a high oxygen fugacity in a shallow magma chamber caused compositional differences in the primary magnetite solid solution in different parts of the Panzhihua intrusion. Additionally, the thermal evolution of the magnetite solid solution differed in different parts of orebody, bringing about variations in spinel development. Together, these effects resulted in spatial variation in the abundance, grain size, and morphology of spinel in different parts of the orebody and intrusion that follows an identifiable distribution law. Furthermore, the compositional zonation of exsolved spinels reflects the rapid growth of exsolution features in a high-temperature environment. Thus, the size, morphology, abundance, and composition of spinel exsolution features in titanomagnetite provide a valuable petrogenetic tool for estimating the maturity and formational environment of the deposit.

摘要:Recent investigations found that hydrothermal activity and sulfide mineralization occurs along the Southwest Indian Ridge (SWIR). The Longqi and Duanqiao hydrothermal fields between 49° E and 53° E of the SWIR are two prospective mineralization areas discovered by Chinese scientists. With the aim to determine the mineralogical and chemical characteristics of sulfide minerals, we have conducted detailed studies for samples from the two areas using an optical microscope, X-ray diffractometer, scanning electron microscope, and electron microprobe. The mineralization processes in the Longqi area are divided into three main stages: (1) the low-medium-temperature stage: colloform pyrite (Py I) + marcasite → euhedral pyrite (Py II), (2) the high-temperature stage: isocubanite (±exsolved chalcopyrite) + pyrrhotite → coarse-grained chalcopyrite (Ccp I), and (3) the medium–low-temperature stage: sphalerite + fine-grained chalcopyrite inclusions (Ccp II) → aggregates of anhedral pyrite (Py III) ± marcasite → Fe-oxide (-hydroxide) + amorphous silica. The mineralization processes in the Duanqiao area are divided into two main stages: (1) the medium–high-temperature stage: subhedral and euhedral pyrite (Py I′) → coarse-grained chalcopyrite (Ccp I′) and (2) the medium–low-temperature stage: sphalerite → fine-grained chalcopyrite (Ccp II′) + chalcopyrite inclusions (Ccp II′) → silica-cemented pyrite (Py II′) + marcasite → Fe-oxide + amorphous silica. We suggest that the fine-grained chalcopyrite inclusions in sphalerite from Longqi and Duanqiao were formed by co-precipitation and replacement mechanisms, respectively. Primary sphalerites from both fields are enriched in Fe (avg. 5.84 wt% for the Longqi field vs. avg. 3.69 wt% for the Duanqiao field), Co (avg. 185.56 ppm for the Longqi field vs. 160.53 ppm for the Duanqiao field), and Cd (avg. 1950 ppm for the Longqi field vs. avg. 525.26 ppm for the Duanqiao field). Cu contents in pyrite from the Duanqiao field (Py I′: avg. 849.23 ppm and Py II′: avg. 1191.11 ppm) tend to be higher than those from the Longqi field (Py I: avg. 26.67 ppm, Py II: avg. 445 ppm, and Py III: avg. 179.29 ppm). Chalcopyrite from both fields is enriched in Zn (Ccp I: avg. 3226.67 ppm, Ccp II: avg. 9280 ppm, Ccp I′: avg. 848 ppm, Ccp II′ (inclusions): avg. 1098 ppm, and Ccp II′ (fine-grained): avg. 1795 ppm). The varying contents of Zn in the different pyrite and chalcopyrite generations may result from the zone refining process. An integrated study of the mineralogy and mineralogical chemistry suggests that the hydrothermal fluids of the Longqi area are likely conditioned with higher temperatures and relatively lower fO2 and fS2 than those of the Duanqiao area, but in contrast to the former, the latter is much affected by the compositions of the surrounding rocks.

摘要:The gold concentration areas in the northwestern Jiaodong Peninsula constituted an important gold metallogenetic region in Eastern China during the Mesozoic. The deep geological bodies’ texture characteristic is important for exploring the resources thoroughly and understanding the metallogenic process. The detailed textures were revealed using high-resolution seismic profiles through the three major ore-controlling structures-Sanshandao fault zone, Jiaojia fault zone and Zhaoping fault zone. This study aims to establish a deep structural framework of this area. Based on their formation mechanism, the fault structures developed in the area can be divided into regional and local fault structures. The structural styles are characterised by superimposing their compressional, strike-slip and extensional multi-stage activities. The crust is cut by vertical structures corresponding to a left-lateral strike-slip fault system on the surface. Nearby these structures are the arc-shape structures formed by multi-stage magma intrusions into the upper crust. Bounded by the Tancheng–Lujiang and Muping–Jimo fault zones, the current Jiaodong block, developed a series of NE-trending strike-slip fault systems, was probably formed by the assemblage of several obliquely aligned blocks. The intensive magmatism and hydrothermal activity between the blocks induced large-scale mineralisation. It provides a new angle of view for understanding the cratonic destruction and large ore-concentration formed during the Mesozoic.

摘要:Based on comprehensive petrological, geochronological, and geochemical studies, this study analyzed the re